General: 850: - Turbo Gauge

Peteodell · Feb 21st, 2010, 22:53

Hi All.....
Need to pull on your wealth of knowledge once more Guys!!!

Anyone have an idea as to why the Turbo needle on my dash just sits in the middle of the gauge and never moves????

Cheers Pete

Merc85 · Feb 21st, 2010, 22:57

Hi, it just sits there probably due to the line has come disconnected somewhere, i reckon just under the air intake behind the grille. trace the vac line usually white from the bulkhead, it should come out the left hand side of the bulk head then to the front run along the top of the intercooler then go under the cover on the intake manifold where it attaches to the vac tree.

Peteodell · Feb 21st, 2010, 23:01

Great stuff.... I will start with looking at that in the morning then...

Thanks Merc

Peteodell · Feb 22nd, 2010, 18:29

Thanks Merc.... Hit the nail on the head.... All working fine!!!

Pete

Feb 21st, 2010, 22:53	#1
Peteodell Member Last Online: Nov 14th, 2015 17:37 Join Date: Feb 2010 Location: Portishead	Turbo Gauge Hi All..... Need to pull on your wealth of knowledge once more Guys!!! Anyone have an idea as to why the Turbo needle on my dash just sits in the middle of the gauge and never moves???? Cheers Pete

Feb 21st, 2010, 22:57	#2
Merc85 Premier Member Last Online: Apr 19th, 2024 12:58 Join Date: Dec 2009 Location: Harwich	Turbo boost Hi, it just sits there probably due to the line has come disconnected somewhere, i reckon just under the air intake behind the grille. trace the vac line usually white from the bulkhead, it should come out the left hand side of the bulk head then to the front run along the top of the intercooler then go under the cover on the intake manifold where it attaches to the vac tree. __________________ HLM304, Forge unos 17.5psi at 3.8 bar, 18t, Me7 Manifold, Blues, Walbro, De-cat, Ported n Polished Head, 3" Dp stainlesss exhaust, Carbon Air intake, Polly Bushed thoughout.

Feb 21st, 2010, 23:01	#3
Peteodell Member Last Online: Nov 14th, 2015 17:37 Join Date: Feb 2010 Location: Portishead	Great stuff.... I will start with looking at that in the morning then... Thanks Merc

Feb 22nd, 2010, 18:29	#4
Peteodell Member Last Online: Nov 14th, 2015 17:37 Join Date: Feb 2010 Location: Portishead	Thanks Merc.... Hit the nail on the head.... All working fine!!! Pete

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)