|
Information |
|
In tank fuel pump for L reg Torslanda.Views : 1617 Replies : 9Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Sep 8th, 2008, 10:50 | #1 |
New Member
Last Online: Sep 25th, 2008 09:21
Join Date: Dec 2003
Location: cumbria
|
In tank fuel pump for L reg Torslanda.
I never know how much fuel is in my car, it's driving me crazy!
Has anyone got a spare one of these? Cheers, Neil |
Sep 8th, 2008, 11:32 | #2 |
Ovlovnut
|
A polite request............
Hi Lampkin, er before you get excited, no I have'nt got one. Sorry.
Reason for replying it to ask, that if you do replace yours would you put a few piccies up, like a 'how-to'? My main pump 'sings' once fuel is low say, below 1/4 tank. Telling me that the in-tank pump is either 'dead' or one of the pipes have 'blown off' allowing it to just uselessly pump the fuel straight back to where it came from. Being novicey' it'll help loads if I could have a preview of what to expect Good Luck, oh & BTW I THINK the pumps are still available at Mainstealers for less than £40
__________________
2004 V70 2.4SE Auto 'The Welshmobile’ 2002 Laika Ecovip 400i ( Motorhome on an Iveco 2.8TD) http://www.gitessouthbrittany.com/ http://moncopainmonchien.jimdo.com/ |
Sep 8th, 2008, 22:39 | #3 | |
VOC Member
Last Online: Dec 3rd, 2021 08:39
Join Date: Jan 1970
Location: Sutton, near Ely
|
Quote:
Neil, have you checked the wiring from the sender to the gauge? A good test is to disconnect the sender and check the gauge and then ground the wire and see if the gauge reading changes. |
|
Sep 9th, 2008, 09:08 | #4 |
New Member
Last Online: Sep 25th, 2008 09:21
Join Date: Dec 2003
Location: cumbria
|
Hello Andrew.
The actuall wire connector is totally snapped at the round white plastic cap thing so I think thats definitely the problem. I was wondering if it can be re connected somehow? By the way, what is the actuall part called that I need? Cheers Neil |
Sep 9th, 2008, 09:58 | #5 |
VOC Member
Last Online: Dec 3rd, 2021 08:39
Join Date: Jan 1970
Location: Sutton, near Ely
|
I doubt that any reconnection would last very long but if you're creative then you may be able to do something.
I think they're just called a 'fuel gauge sender' or possibly 'sensor'. You do need to specify the year and engine as there are a number of variations. You could look at http://cgi.ebay.com/ebaymotors/Fuel-...mZ140265416416 eBay item #140265416416 but I don't know if it will fit your car. Search for 'volvo fuel gauge' without the quotes. |
Sep 9th, 2008, 10:06 | #6 |
New Member
Last Online: Sep 25th, 2008 09:21
Join Date: Dec 2003
Location: cumbria
|
Blo*d* hell!
They are quite pricey arent they? I think I will have a go at spot soldering first. Or perhaps, I thought I could get a very small self tapper, wind the wire around it and then screw it into the stumpy bit of wire in the plastic cap? |
Sep 30th, 2008, 03:21 | #7 |
Dodger
Last Online: Aug 16th, 2017 20:21
Join Date: Oct 2007
Location: Carlisle
|
Having spent £170 on one I examined the broken one (yes, it was the electrical connection in the little black block) and decided I could have fixed it. New wires would have had to be joined below the flange (i.e. inside the tank) then threaded out through the hole where the block would have been then the hole sealed. However, the chances are you will damage the pipes when removing unless you are very careful and fashion some sort of tool to engage with the lugs from a vertical direction. Removing the rubber pipes from the metal ones is fraught too because where the metal pipes go into the flange is sure to be at least partially corroded, cutting off is safer even if it means routing in new pipes.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|