|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
Information |
|
Fault code 042Views : 8475 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
May 26th, 2009, 17:13 | #1 |
New Member
Last Online: Jul 23rd, 2013 09:22
Join Date: May 2009
Location: liecester
|
Fault code 042
I have an 06 m/y euro4 v70 diesel which I am perfectly happy with, except when the message centre reports" Engine system service required" & when I press & hold the mileage reset button the code 042 is displayed. A day later the message disappears only to return several days later. I do not use a regular volvo dealer as the distance is too great compared with my local garage, so I am having difficulty understanding whats going on with my V70.
Anybody out there know what 042 code means on my model V70 PLEASE. |
Jun 6th, 2009, 21:58 | #2 |
Member
Last Online: Jun 26th, 2017 10:04
Join Date: May 2009
Location: Rossett
|
Dont know what the code means but I had a similar problem with this message on a 2007 model v70
Turned out brake lights and cruise control were not set properly Easy check - are your brake lights coming on with just the usual light touch of the pedal - if they are its probably not this problem but could be worth a try |
The Following User Says Thank You to jco For This Useful Post: |
Aug 25th, 2009, 10:49 | #3 |
New Member
Last Online: Jul 23rd, 2013 09:22
Join Date: May 2009
Location: liecester
|
Yes, the problem was as you indicated with the setting of the brake light switch relative to the brake pedal, & required only a few minutes to reset.
After your message I noted following cars indicating they were not happy with the amount of rear illumination from my car, when I checked & found the brake lights were on most of the time without the brake pedal being depressed. I'd also had trouble with the cruise control switching itself off. Good answer that man! MIRABOSS (RETIRED) |
Oct 11th, 2010, 05:17 | #4 |
New Member
Last Online: Oct 12th, 2010 22:52
Join Date: Oct 2010
Location: quebec
|
Hi guys,
I just came across your post and glad I did, my v70r has the same symptom you seem to be describing. You seem to be describing reseting the setting on the brake light switch. Would you mind describing how that can be done? Thanks in advance! mx3_jmcb@hotmail.com |
Nov 1st, 2010, 20:04 | #5 |
Member
Last Online: Jun 26th, 2017 10:04
Join Date: May 2009
Location: Rossett
|
Hi
Just saw this post problem in my case was the brake light needed a lot of pressure to come on. dealer adjusted pedal which is now very sensitive but all works fine Not sure you can do it yourself |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|