|
S60 & V60 '11-'18 / XC60 '09-'17 General Forum for the P3-platform 60-series models |
![]() |
|
Drive shaft replacement on XC60 2.4D DriveViews : 2970 Replies : 3Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Member
Last Online: Nov 29th, 2015 18:18
Join Date: Nov 2009
Location: Somewhere
|
![]()
You may have seen my small gripes in the "Are XC60 owners happy?" tread.
Well the car (XC60 2.4 D Drive SE Manual) was in the garage this week to get the issues sorted. Turns out the most concerning gripe of the knocking from the front-suspension (on both sides) when going over speed humps even at < 10 mph was due to the drive shafts. Dealer said this was the 1st time they had come across this - and reported the fault to the Volvo HQ to be advised that this was a recognised issue and that modified drive-shafts were available........ and were now on order. My car is 2.4 Drive model - so clearly only fwd. But other owners might want to be aware. Mine was oner of the first few XC60 Drive's in the UK so lets hope it was only an issue with the first "batch". Kind of worrying on the one hand - but good in another that Volvo seem to be going out of their way to rectification this and the alarm fault (new sensor to be shipped in) and doing the wing mirror noise fix again. Last edited by Another; Apr 16th, 2010 at 19:18. |
![]() |
![]() |
The Following User Says Thank You to Another For This Useful Post: |
![]() |
#2 |
Volvo Owner Since 1990
Last Online: Apr 3rd, 2024 13:27
Join Date: Sep 2007
Location: Near Norwich
|
![]()
Mileage?
|
![]() |
![]() |
![]() |
#4 |
Junior Member
Last Online: Feb 11th, 2012 12:02
Join Date: Aug 2009
Location: Chippenham
|
![]()
My XC60 Drive Manual has been in three times for this problem.
On the last occasion they replaced the drive shafts and the problem looks to be fixed. I was starting to worry it would not be fixed. That said - I would not have wanted that repair bill if it had been out of warranty ! Mikeage 5K. ..MM |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|