|
700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars |
Information |
|
Bonnet-scuttle sealViews : 378 Replies : 5Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 12th, 2024, 16:01 | #1 |
Senior Member
Last Online: Jun 14th, 2024 16:33
Join Date: Jun 2010
Location: East Mids
|
Bonnet-scuttle seal
My scuttle to bonnet seal seems to have shrunk and ripped slightly resulting in excessive amounts of water dripping on the cable grommets on the bulkhead and finding ways in.
Is this a common fault? If not I can source a good used one, but if they're all like that then I'll come up with alternative arrangement with an aftermarket seal I guess. https://www.skandix.de/en/spare-part...-rear/1031977/ |
Mar 12th, 2024, 18:36 | #2 | |
Master Member
Last Online: Jun 15th, 2024 23:23
Join Date: Apr 2014
Location: Stroud
|
Quote:
|
|
Mar 12th, 2024, 19:17 | #3 |
Senior Member
Last Online: Jun 13th, 2024 11:06
Join Date: Aug 2006
Location: Cannington
|
Oof that genuine item is a bit spendy! esepcially once you add on the Skandix postage.
Two of the clips have come out of the seal on mine, remaining in the scuttle itself (after I leant on the seal when working on the distributor), right above the distributor. Luckily water only seems to get through when the bonnet is opened. It's interesting that they modified the design to fit it with rivets rather than the rather pathetic clips. Perhaps the old design could be drilled to take rivets. |
Mar 12th, 2024, 20:49 | #4 |
Senior Member
Last Online: Jun 14th, 2024 16:33
Join Date: Jun 2010
Location: East Mids
|
|
Mar 12th, 2024, 20:50 | #5 | |
Senior Member
Last Online: Jun 14th, 2024 16:33
Join Date: Jun 2010
Location: East Mids
|
Quote:
|
|
Mar 13th, 2024, 12:48 | #6 |
Master Member
Last Online: Jun 15th, 2024 23:23
Join Date: Apr 2014
Location: Stroud
|
Scuttle has to come off and quite often the clips are damaged or they don’t fit properly after, once disturbed they can be a pain in the backside. Been there, got the t shirt
|
The Following User Says Thank You to P505DEF For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|