|
Diesel Engines A forum dedicated to diesel engines fitted to Volvo cars. See the first post in this forum for a list of the diesel engines. |
![]() |
|
ECM 6805 low pressure from vac pumpViews : 1548 Replies : 17Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#11 |
Junior Member
Last Online: May 30th, 2024 01:57
Join Date: Nov 2019
Location: Yateley
|
![]()
Thanks again Clan. I didn't manage to find that rubber grommet so I've just taped up the hole. I'll check the brake pedal later. I'm guessing my only cure is a replacement servo unit?
|
![]() |
![]() |
![]() |
#12 |
Junior Member
Last Online: May 30th, 2024 01:57
Join Date: Nov 2019
Location: Yateley
|
![]()
I'm guessing they're not cheap......
|
![]() |
![]() |
![]() |
#13 |
Junior Member
Last Online: May 30th, 2024 01:57
Join Date: Nov 2019
Location: Yateley
|
![]()
I see there are several components......not sure which I'd need? Is this a DIY job do you think?
|
![]() |
![]() |
![]() |
#14 | |
Experienced Member
Last Online: Today 00:13
Join Date: Jun 2007
Location: L/H side
|
![]() Quote:
I would risk a used servo , It's not often they leak ..
__________________
|
|
![]() |
![]() |
![]() |
#15 |
Junior Member
Last Online: May 30th, 2024 01:57
Join Date: Nov 2019
Location: Yateley
|
![]()
Thanks a lot for your help Clan. I was thinking of giving a used unit a try. Will have a look online. Cheers
|
![]() |
![]() |
![]() |
#16 |
Experienced Member
Last Online: Today 00:13
Join Date: Jun 2007
Location: L/H side
|
![]()
yes a very good chance it will be fine I have changed or hear about just 4 leaky servos since the 1970's ...
__________________
|
![]() |
![]() |
![]() |
#17 |
Junior Member
Last Online: May 30th, 2024 01:57
Join Date: Nov 2019
Location: Yateley
|
![]()
That's an enviable reliability record!
|
![]() |
![]() |
![]() |
#18 |
Junior Member
Last Online: May 30th, 2024 01:57
Join Date: Nov 2019
Location: Yateley
|
![]()
Hi guys. Just wanted to post a final update. I bought a used servo unit on eBay £75 delivered ( from Lithuania including master cylinder and reservoir). On my XC90 2003 you have to drop the engine down to get the units swapped over and I had to take the master cylinder off. I had to borrow my mate's pressure bleeding kit too to bleed the system properly. But all is well and thanks again to Clan. This is a great forum full of knowledgeable, experienced people. Happy days! Cheers
|
![]() |
![]() |
The Following User Says Thank You to Newbie Tony For This Useful Post: |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|