|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
Turbo VNT actuator position on start upViews : 303 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 19th, 2020, 20:12 | #1 |
Member
Last Online: Oct 7th, 2023 14:41
Join Date: Apr 2013
Location: UK
|
Turbo VNT actuator position on start up
Hi,
I was looking at my VNT actuator arm position today. From what I remember it should move just after start up- but I may be getting that mixed up with my Citroen. Can anyone confirm. Mine didn't move just after start up. My car is 2003 XC90 D5. No fault codes etc. Thanks |
Sep 19th, 2020, 20:28 | #2 |
Premier Member
Last Online: Dec 26th, 2021 13:42
Join Date: Dec 2013
Location: Crewe
|
Stays still on start up as vacuum is required by the engine mounts then as revs hit 1000, vacuum is cut from the mounts and the boost solenoid diverts it to the VNT actuator.
Lightly revving the engine to 3000 or so then releasing should be enough to see the VNT arm have full travel in both directions (around 20mm) and you can see the boost pipe bulge as boost increases.
__________________
2002 S60 SE D5 Manual 209000 miles |
The Following User Says Thank You to cheshired5 For This Useful Post: |
Sep 19th, 2020, 20:54 | #3 |
Member
Last Online: Oct 7th, 2023 14:41
Join Date: Apr 2013
Location: UK
|
Thanks Cheshired5. I'll check that tomorrow.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|