V50 General : Loss of Power - Mass Airflow Sensor Error

[Adr10]

Hi

I have a volvo V50 1.6 edrive and have a problem with a error from the mass flow sensor which keeps reducing the power.

I have recently had the DPF and Turbo replaced and Manifold cleaned.

The car accelerates perfectly now with the new turbo, DPF but when you go to change gear an error occurs from the mass flow sensor saying the airflow problem and keeps putting the car in limp mode until i reset the code. I have replace the DPF pressure sensor, MAP and Mass airflow sensor along with the new DPF and turbo and cleaned Manifold.

Fault code is P1103

Any help much appreciated

[Clan]

Originally Posted by Adr10

Hi

I have a volvo V50 1.6 edrive and have a problem with a error from the mass flow sensor which keeps reducing the power.

I have recently had the DPF and Turbo replaced and Manifold cleaned.

The car accelerates perfectly now with the new turbo, DPF but when you go to change gear an error occurs from the mass flow sensor saying the airflow problem and keeps putting the car in limp mode until i reset the code. I have replace the DPF pressure sensor, MAP and Mass airflow sensor along with the new DPF and turbo and cleaned Manifold.

Fault code is P1103

Any help much appreciated

The fault codes suggests there is a fault with the power feed or signal lead on the Air mass meter i would check that each wire has the expected voltage or earth on it ..