|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
SpeakersViews : 1225 Replies : 17Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jul 24th, 2012, 21:48 | #11 |
VOC Member
Last Online: Sep 11th, 2019 14:36
Join Date: Aug 2008
Location: Blackpool
|
Greens purples gray are speakers and you should have 2 of each if you dont have an amp in the boot or under the seat.
Power will go something like this Red live Black ground Yellow switched live Blue antenna power cable or amp remote cable |
Jul 25th, 2012, 09:00 | #12 |
New Member
Last Online: Jul 25th, 2012 16:25
Join Date: Jul 2012
Location: birmingham
|
added a pic of what i have. i dont have a apm in boot or under seat. unless its tiny or? i dont have any speaker wires just what you see in the pic. i was told i had alpine volvo spec???/
i have power no speakers as i cant find them??? |
Jul 25th, 2012, 10:30 | #13 |
Trader
Last Online: Jul 7th, 2022 15:22
Join Date: Jan 2007
Location: Shildon
|
The standard speakers are made by Alpine the same as the cd changers. I would suggest fitting the rear pillar speakers and adding an original amp, come and have a listen to mine Andy and see what you think. The original speakers are an odd size and you will need adaptor plates to fit aftermarket speakers.
|
The Following User Says Thank You to RiPsTa33 For This Useful Post: |
Jul 25th, 2012, 11:27 | #14 |
VOC Member
Last Online: Nov 6th, 2016 10:18
Join Date: May 2009
Location: Blackpool UK
|
The speaker wires will be connected to the Volvo fitted amplifier, the input to the amplifier is the six pin DIN plug, to connect a normal stereo to this will require the new stereo to be equipped with RCA outputs often refered to as "Pre-Outs" (those red and white phono plugs/ sockets often found on the back of home HiFi units). Make sure the new head unit has front AND rear pre-outs, some only have one intended for feeding a sub, units with a single pre-out/ RCA are no use to you.
To connect the RCA outputs from the stereo you will need an RCA to six pin DIN socket, into this you plug the six pin DIN plug floating around inside the hole where the stereo used to be. One of the pins for the six pin DIN is the amp remote power signal, you will need to connect this to the new stereo remote amp enable wire. I can post up a wiring diagram of the addapter cable later tonight if that is of any help, you can get the bits from Maplins and make the lead yourself (assuming you know how to use a soldering iron) - Mike |
Jul 25th, 2012, 12:02 | #15 |
New Member
Last Online: Jul 25th, 2012 16:25
Join Date: Jul 2012
Location: birmingham
|
Super.. ya the diagram will be great.. sound like my setup as i have the 6 pin header
ill wait till i get that first then head down to maplins |
Jul 26th, 2012, 07:37 | #16 |
Ovlovnut
|
@ Andynorthface, you wana listen to my 240's set up. Just got the 2 front 'door speakers' anything more than miniscule volume and they distort like owt. Pants they are.............. bet yours is ace in comparison........... eh bloody luxury you 'ave!
__________________
2004 V70 2.4SE Auto 'The Welshmobile’ 2002 Laika Ecovip 400i ( Motorhome on an Iveco 2.8TD) http://www.gitessouthbrittany.com/ http://moncopainmonchien.jimdo.com/ |
The Following 2 Users Say Thank You to Paul240480 For This Useful Post: |
Jul 26th, 2012, 09:48 | #17 |
Where's that 18mm socket?
Last Online: Apr 25th, 2016 23:01
Join Date: Sep 2010
Location: Normally in the dog house, Chester-Le-Street
|
Putting the rear pillars in made a huge difference,but I'm gonna replace the rear door speakers sometime because they are a bit rattly. Just other things keep getting in the way.
|
Jul 26th, 2012, 22:49 | #18 |
VOC Member
Last Online: Sep 11th, 2019 14:36
Join Date: Aug 2008
Location: Blackpool
|
There the power wires and the speaker wires are behind this in the photos you can see the green and purple wires follow these
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|