|
Information |
|
S60 2002 Heater blower motor exchange walkthroughViews : 16221 Replies : 7Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 10th, 2013, 19:08 | #1 |
Junior Member
Last Online: Mar 7th, 2016 20:18
Join Date: Oct 2013
Location: Falkirk
|
S60 2002 Heater blower motor exchange walkthrough
My heater/blower had cut down to half power then it eventually stopped working altogether, i looked on this forum and another Volvo forum and bothe said it was either the common resister for the blower or the motor, so i decided to change mine but could not find a walk through for an S60 so decided to make one when i was changing mine!
open glove box pull open and on top right there is a strut as below pull strut towards you and it will pop out, then open glove box full as below, pull hard and the plastic clips will slip through catch without breaking allowing the glovebox to open fully unplug grey plug for glove box light (at back) undo screws under dash next to footwell courtesy light and remove covering panel as below to gain access to blower motor and cabin filter undo all screws holding glove box to dash, (2 on top 3 down each side) unplug footwell courtesy light (green plug ) this will allow you to remove whole glove box completly pull up side paneling holding carpet down (held on with plugs come away easy try not to twist or you might snap plugs) pull back carpet, blower is located on left under dash as per picture pull out large grey plug from blower motor (for referance white box with black lid on right in picture is cabin/ pollen filter 4 screws to access) undo brass coloured screws (all star T25 multipoint) holding blower in place and pull out hoses attached to it (remember where they go back and what position the whole unit goes back into place) screw at back requires flexi adjuster or screw driver as shape of bulk head affects ability to access with straight socket/ driver pull out old blower may take some fettling but it will come out with a little determination and alot of swearing reverse whole process fitting new motor hope yous find this usefull
__________________
Life's like a road that you travel on, When there's one day here and the next day gone Last edited by BigTazScotland; Nov 10th, 2013 at 20:05. |
The Following 25 Users Say Thank You to BigTazScotland For This Useful Post: |
Nov 10th, 2013, 19:49 | #2 |
Junior Member
Last Online: Mar 7th, 2016 20:18
Join Date: Oct 2013
Location: Falkirk
|
I got my replacement for £25 from local scrap yard that was for motor, fan and resister (whole unit ) i had checked on line and at volvo and cheapest resistor was £90 and cheapest motor was £240 so thought at £25 i had nothing to loose/
Getting from there also gave me a chance to practice removal on a damaged car rather than trying first time on mine and damaging something. hope my walk through is useful i tried to keep it as simple as possible rather than over complicating it and explaining everything like i would to someone thats never picked up tools before.
__________________
Life's like a road that you travel on, When there's one day here and the next day gone Last edited by BigTazScotland; Nov 10th, 2013 at 20:08. |
The Following 4 Users Say Thank You to BigTazScotland For This Useful Post: |
Nov 10th, 2013, 20:07 | #3 |
Junior Member
Last Online: Aug 27th, 2016 01:26
Join Date: Jun 2009
Location: middlesbrough
|
you could use the walk through for pretty much most cars out there lol
|
Nov 10th, 2013, 20:09 | #4 |
Junior Member
Last Online: Mar 7th, 2016 20:18
Join Date: Oct 2013
Location: Falkirk
|
yeah but there where quite a few differences even between models so i thought i would be helpful and make one for an S60 specific as i was doing it anyway
__________________
Life's like a road that you travel on, When there's one day here and the next day gone |
The Following User Says Thank You to BigTazScotland For This Useful Post: |
Nov 10th, 2013, 21:06 | #5 |
Member
Last Online: Jun 27th, 2018 20:11
Join Date: Dec 2012
Location: Bristol
|
Thanks for taking the time to put this together BigTazScotland :-)
|
Nov 10th, 2013, 21:25 | #6 |
Senior Member
Last Online: Feb 27th, 2017 12:10
Join Date: Mar 2009
Location: birmingham
|
I too done this job today got a whole unit from the breakers got it home and the new one fan didn't work so used my old fan and took the resistor out of the new one now all works a treat..
|
Nov 10th, 2013, 21:43 | #7 |
Junior Member
Last Online: Mar 7th, 2016 20:18
Join Date: Oct 2013
Location: Falkirk
|
Think I would have took a breakdown before I thought about mixing and matching as it was minus 1 degrees Celsius hear today and I was freezing
__________________
Life's like a road that you travel on, When there's one day here and the next day gone |
Nov 11th, 2013, 09:09 | #8 |
Lunatic from Wakefield
Last Online: Oct 10th, 2024 11:48
Join Date: Dec 2004
Location: wakefield
|
this needs to be made a Sticky.
mike
__________________
2012 volvo xc90 Executive Buccaneer Bermuda 2021 |
The Following 4 Users Say Thank You to outnumbered For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|