1800E/ES cylinder head

swede · Feb 18th, 2013, 10:31

I have an fuel injection cylinder head in excellent condition with all valves and springs if anyone is interested.

agent_strangelove · Feb 18th, 2013, 16:02

You might do better if you state which b20 injected head it is. There were a number of different ones. Is it d-jet? I would assume it is but then is it an E or an F? But even beyond that you might state the thickness as it if the head has been shaved or compression upped.

Chris

kishor kassie · Feb 19th, 2013, 08:25

Quote:

Originally Posted by swede

I have an fuel injection cylinder head in excellent condition with all valves and springs if anyone is interested.

Good morning

I am keen to buy this head. What's your bottom cash price for it. Ta, Kassie 078 2887 9494

kishor kassie · Feb 19th, 2013, 16:45

Quote:

Originally Posted by swede

I have an fuel injection cylinder head in excellent condition with all valves and springs if anyone is interested.

Hi, may i have a number to call you on. Ta Kassie 078 2887 9494

swede · Feb 21st, 2013, 10:04

The head came from a P1800E so probably a B20E unless anyone can tell me if there is any difference in the F head design. I am told that the head thickness should be 84,9 mm (3.3425 inches) well this one I have measured to be 3.345 inches so if that is correct then it has not been skimmed.

swede · Feb 21st, 2013, 15:26

The inlet ports measure 41mm at the joint face and the valve head diameters are 43mm inlet, 35mm exhaust if this helps. The head is just as it was when removed with no cleaning of the joint faces etc.

cyd head 1.jpg

cyd head 2.JPG

cyd head 3.jpg

cyd head 5.JPG

cyd head 6.JPG

Feb 18th, 2013, 10:31	#1
swede Member Last Online: Jun 19th, 2021 09:41 Join Date: May 2007 Location: sevenoaks	1800E/ES cylinder head I have an fuel injection cylinder head in excellent condition with all valves and springs if anyone is interested.

Feb 21st, 2013, 10:04	#5
swede Member Last Online: Jun 19th, 2021 09:41 Join Date: May 2007 Location: sevenoaks	1800E/ES cylinder head The head came from a P1800E so probably a B20E unless anyone can tell me if there is any difference in the F head design. I am told that the head thickness should be 84,9 mm (3.3425 inches) well this one I have measured to be 3.345 inches so if that is correct then it has not been skimmed.

Feb 18th, 2013, 16:02	#2
agent_strangelove Pastry Engineer Last Online: Mar 3rd, 2024 21:47 Join Date: Feb 2008 Location: Scappoose Oregon	You might do better if you state which b20 injected head it is. There were a number of different ones. Is it d-jet? I would assume it is but then is it an E or an F? But even beyond that you might state the thickness as it if the head has been shaved or compression upped. Chris

Feb 21st, 2013, 15:26	#6
swede Member Last Online: Jun 19th, 2021 09:41 Join Date: May 2007 Location: sevenoaks	The inlet ports measure 41mm at the joint face and the valve head diameters are 43mm inlet, 35mm exhaust if this helps. The head is just as it was when removed with no cleaning of the joint faces etc. cyd head 1.jpg cyd head 2.JPG cyd head 3.jpg cyd head 5.JPG cyd head 6.JPG

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)