Inlet manifold take off nipple

Roger Jennings · May 31st, 2009, 21:26

Looking for the above item to connect a vacuum gauge to. I know it can be done via a Tee piece in the vacuum hose but would prefer to source a nipple to fit into the blanking plug at the front of the manifold and run the vacuum gauge from this. It is a 1986 B230A engine.
Thanks

Steve and his 244 · May 31st, 2009, 23:12

Hmm I may have one on my spare manifold you could have, but its a different early carb manifold and I dont know if the thread etc will be the same.

May 31st, 2009, 21:26	#1
Roger Jennings VOC Member Last Online: Apr 22nd, 2024 20:55 Join Date: Jun 2006 Location: Yorkshire	Inlet manifold take off nipple Looking for the above item to connect a vacuum gauge to. I know it can be done via a Tee piece in the vacuum hose but would prefer to source a nipple to fit into the blanking plug at the front of the manifold and run the vacuum gauge from this. It is a 1986 B230A engine. Thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)