Breaking Volvo 940 diesel estate

[360beast]

Kev's on the ball!

[360beast]

Originally Posted by volvo always

Looking for the little grey blanking plate above drivers side door to side of roof lining grab handle. Trim blanking plate with screws please.

I have the front seat rail covers but on my car the plastic plug that the screw goes into is missing. Need both plugs and screws. They clip on but cant be fixed as plug, white plug from memory the screws goes into is missing.

Posted to near Burton On Trent.

Many thanks. James.

I'll have a look at the blanking trim.

Not too sure what you mean James about the other bit, I just can't picture it.

[volvo always]

Originally Posted by rwdkev

Hi James,

If Luke doesn't want to strip down seats then I might have these.

Kevin

Hi Kev, thanks for the offer. They are unfortunately not part of the seat rails but part of the floor trim fixing. Only way of getting them is a breaker if they can't be removed!

James

[volvo always]

Originally Posted by 360beast

I'll have a look at the blanking trim.

Not too sure what you mean James about the other bit, I just can't picture it.

Hi Luke,

On the front seats sliding frame rail trim, circled green, there is a fixing screw that secures the L shaped grey plastic moulding that also clicks into place.

This torx headed screw which secures the trim cover goes into a plastic like wall plug. My car is missing this plug that the screw goes into. Don't know why it's missing but hope it will come out.



Nice seats. minimal wear for age.

James.

[360beast]

I'm with you now James and your previous description makes complete sense now haha. I'll check it is there first before saying yes!

[Hell Driver]

Hi, is the vertical infill strip to the rear of the driver's side rearmost window available (the window along side the boot window, right in the corner by back, D pillar). Thanks. Mine is dented and I'm having some respray work done so a chance to fix it! I think the 900 looks the same as the 740. Not sure how it comes out yet. Thanks, Andy

[360beast]

Originally Posted by Hell Driver

Hi, is the vertical infill strip to the rear of the driver's side rearmost window available (the window along side the boot window, right in the corner by back, D pillar). Thanks. Mine is dented and I'm having some respray work done so a chance to fix it! I think the 900 looks the same as the 740. Not sure how it comes out yet. Thanks, Andy

Hiya Andy

I've read that several times now and I think I know what you mean. I'll get a photo of the trim tonight and you can check if I've understood you.

I haven't touched this for over a week due to other commitments so tonight I will try and strip it down a bit more as I've got to get the dashboard etc out for tomorrow.

[360beast]

James I've got both of the seat trim plugs you were after but only one screw for some reason.

No trim blanks sorry, they fell apart on removal, I've just removed the A trim and this has had a replacement screen as lots of the trim is damaged and or badly glued back together and there's a massive pile of screen sealant at the bottom of the A pillars both sides.

[volvo always]

Originally Posted by 360beast

James I've got both of the seat trim plugs you were after but only one screw for some reason.

No trim blanks sorry, they fell apart on removal, I've just removed the A trim and this has had a replacement screen as lots of the trim is damaged and or badly glued back together and there's a massive pile of screen sealant at the bottom of the A pillars both sides.

Perfect, that's great Luke, thanks for trying on the trim blank. I have the passenger side screw, so one screw is good for drivers trim! How much posted?


James

[Hell Driver]

Ok thanks. Got car booked in for work 13th Sept so would be good to get one by then. Mine has a dent in. Not sure how they fix in. Its the colour coded vertical in fill. Upside down L shape.