Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General

Notices

S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

Clunk pulling away

Views : 553

Replies : 8

Users Viewing This Thread :  

Reply
 
Thread Tools Display Modes
Old Oct 16th, 2021, 19:46   #1
The Phoenix
Junior Member
 
The Phoenix's Avatar
 

Last Online: Feb 20th, 2022 20:03
Join Date: Sep 2018
Location: Motherwell
Default Clunk pulling away

2003 V70 D5 (Auto) I have has a small clunking noise when I pull away from a standstill and only a standstill.

Would this be the bottom mount coming from the gearbox area?

Any advice greatly appreciated.
The Phoenix is offline   Reply With Quote
Old Oct 16th, 2021, 21:42   #2
Georgeandkira
Premier Member
 

Last Online: Today 14:30
Join Date: Feb 2009
Location: Hackensack
Default

The mount you described did the same thing in another car I had. That mount had rubber inserts which had deteriorated badly.

Inspect all the mounts given their age.
How many miles are on your '03?

The mount at the crank pulley requires removing the RF wheel, removal of two 10mm sheet metal nuts and folding the fender liner back (it's creased) for inspection.
Georgeandkira is offline   Reply With Quote
Old Oct 16th, 2021, 22:50   #3
Simmy
Premier Member
 
Simmy's Avatar
 

Last Online: Yesterday 23:34
Join Date: Mar 2017
Location: Manchester
Default

check your bottom ball joints these clunk on take up if they are worn
Simmy is offline   Reply With Quote
Old Oct 17th, 2021, 13:05   #4
The Phoenix
Junior Member
 
The Phoenix's Avatar
 

Last Online: Feb 20th, 2022 20:03
Join Date: Sep 2018
Location: Motherwell
Default

Quote:
Originally Posted by Georgeandkira View Post
The mount you described did the same thing in another car I had. That mount had rubber inserts which had deteriorated badly.

Inspect all the mounts given their age.
How many miles are on your '03?

The mount at the crank pulley requires removing the RF wheel, removal of two 10mm sheet metal nuts and folding the fender liner back (it's creased) for inspection.
Thanks, the car has just sort of 164,000 miles on it now. I have replaced both vacuum mounts the mount at the crank pulley and the one on bottom of engine but not the tope engine one. These were all done about 2 years ago.
The Phoenix is offline   Reply With Quote
Old Oct 17th, 2021, 13:08   #5
The Phoenix
Junior Member
 
The Phoenix's Avatar
 

Last Online: Feb 20th, 2022 20:03
Join Date: Sep 2018
Location: Motherwell
Default

Quote:
Originally Posted by Simmy View Post
check your bottom ball joints these clunk on take up if they are worn
I will do thanks.
The Phoenix is offline   Reply With Quote
Old Oct 17th, 2021, 23:00   #6
rickmethven
2010 V70 2.4 Manual
 

Last Online: Mar 21st, 2024 14:05
Join Date: Jul 2012
Location: Perth
Default

Quote:
Originally Posted by The Phoenix View Post
Thanks, the car has just sort of 164,000 miles on it now. I have replaced both vacuum mounts the mount at the crank pulley and the one on bottom of engine but not the tope engine one. These were all done about 2 years ago.
Can I ask where you got your vacuum mounts from?
I have a 07 plate phase 2 D5. Looking for new ones without spending a fortune at volvo.
rickmethven is offline   Reply With Quote
Old Oct 19th, 2021, 19:58   #7
The Phoenix
Junior Member
 
The Phoenix's Avatar
 

Last Online: Feb 20th, 2022 20:03
Join Date: Sep 2018
Location: Motherwell
Default

Quote:
Originally Posted by rickmethven View Post
Can I ask where you got your vacuum mounts from?
I have a 07 plate phase 2 D5. Looking for new ones without spending a fortune at volvo.
My mate works for Dingbro and he got them from his warehouse mate.
The Phoenix is offline   Reply With Quote
Old Oct 22nd, 2021, 20:29   #8
volvo2
Master Member
 

Last Online: Mar 2nd, 2024 18:51
Join Date: Nov 2001
Location: Evesham
Default

Could easily be the lower engine/transmission torque mount. I replaced mine - it is an easy job
volvo2 is offline   Reply With Quote
Old Oct 26th, 2021, 13:03   #9
The Phoenix
Junior Member
 
The Phoenix's Avatar
 

Last Online: Feb 20th, 2022 20:03
Join Date: Sep 2018
Location: Motherwell
Default

Quote:
Originally Posted by volvo2 View Post
Could easily be the lower engine/transmission torque mount. I replaced mine - it is an easy job
Yeah it's feeling like this one is shot. Couple of bolts and a couple of nuts on it.
The Phoenix is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 16:53.


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.