|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Torque setting for front wheel hubViews : 637 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Oct 24th, 2021, 23:32 | #1 |
Member
Last Online: Mar 25th, 2024 19:08
Join Date: Jan 2021
Location: Bury
|
Torque setting for front wheel hub
So my n/s hub was corroded bought one from eBay got my local garage to fit it this was back in June
Went for two tyres yesterday the guy pointed out the nut in the very centre of the hub was loose so he tightened it up Question What is the actual torque for this nut its a V70 D5 2005 TIA |
Oct 25th, 2021, 12:52 | #2 |
Member
Last Online: Apr 1st, 2024 22:31
Join Date: Jan 2016
Location: oldham
|
The driveshaft bolt is torqued to 35Nm or 26lb initially then finally a further angle of 90 degrees.
|
The Following User Says Thank You to sv70 For This Useful Post: |
Oct 31st, 2021, 17:02 | #3 |
Flaccid Member
Last Online: Apr 15th, 2024 16:09
Join Date: Nov 2016
Location: Norwich
|
typical mechanic It's meant to be fcuk all torque as above so he probably put 70nm on it lol
35nm + 90 degrees
__________________
2001 Volvo S60 T5 SE 2.3 Geartronic (Scrapped) 2007 Volvo S60 T5 SE 2.4 Geartronic (Sold) 2008 Volvo V70 D5 SE Sport Geartronic (Current) |
Oct 31st, 2021, 17:23 | #4 |
GoldMember
Last Online: Apr 14th, 2024 10:10
Join Date: Jul 2010
Location: Kent, UK
|
s t r e t c h. bolts
Don't forget the driveshaft bolts are single use.. remove and use a new one torqued as below, volvo p/n 3067 0602 most likely..
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|