Rust advice needed

		Volvo Owners Club Forum > "Technical Topics" > 700/900 Series General
Rust advice needed

700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars

VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

Replies : 37

Users Viewing This Thread :

Thread Tools

Jul 28th, 2023, 22:18	#16
volvo always Premier Member Last Online: Today 10:21 Join Date: Dec 2010 Location: Midlands.	Sadly if the tin worm is extensive then even if getting it welded you will probably re-welding again in a few years in other areas as well as welded areas. Had a 1989 240 outriggers welded and 2 years later rusted out on the weld seam! Mechanically everything is fixable, bodily less so. I would look for a late 98 940 with a good body. All will have some rust but hopefully treated and looked after. If you have a drive, buy yourself a welder and get practising. Wishing you well. They are a good car. James

The Following User Says Thank You to volvo always For This Useful Post:

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)