|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Yoga required for this jobViews : 509 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Aug 23rd, 2011, 09:44 | #1 |
Member
Last Online: Apr 3rd, 2024 16:58
Join Date: Dec 2010
Location: montrose
|
Yoga required for this job
Hi this is a difficult one that i hope you can help me on, right my servo was making the hissing into the floorwell scenario, after breaking myself into 3 peices i managed to get under to have a look and found the seal from the rod at back of brake pedal wasnt sitting on to the floor properly as when tapped it the noise stopped.
Seemingly top tip is this can happen after brake work ie bleeding brakes and pedal on floor etc can catch the sleeve on way back up and i thought it was the unit dying !!. My question is finally this, does anyone know if the seal(grey rubber) just sits into the black seal of the servo or does it hook over or tied etc as seems its not very secure and could easily come out again. V70 T5 2001 Geartronic Anyone ??? Thank you |
Aug 24th, 2011, 15:07 | #2 |
Member
Last Online: Apr 3rd, 2024 16:58
Join Date: Dec 2010
Location: montrose
|
No One Know ??
Right its defo the seal either not sitting right or it has a lip or something under where the pedal is as stays quiet for a while then starts hissing and if i turn the grey boot it seems to stop for a while again, any mechanics advise me on this or have a good diagram i can follow ??? Thanks
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|