Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General > S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 Articles

Notices

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

S60 2002 Heater blower motor exchange walkthrough

Views : 16224

Replies : 7

Users Viewing This Thread :  

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old Nov 10th, 2013, 19:08   #1
BigTazScotland
Junior Member
 

Last Online: Mar 7th, 2016 20:18
Join Date: Oct 2013
Location: Falkirk
Exclamation S60 2002 Heater blower motor exchange walkthrough

My heater/blower had cut down to half power then it eventually stopped working altogether, i looked on this forum and another Volvo forum and bothe said it was either the common resister for the blower or the motor, so i decided to change mine but could not find a walk through for an S60 so decided to make one when i was changing mine!

open glove box pull open and on top right there is a strut as below



pull strut towards you and it will pop out, then open glove box full as below, pull hard and the plastic clips will slip through catch without breaking allowing the glovebox to open fully



unplug grey plug for glove box light (at back)



undo screws under dash next to footwell courtesy light



and remove covering panel as below to gain access to blower motor and cabin filter



undo all screws holding glove box to dash, (2 on top 3 down each side)



unplug footwell courtesy light (green plug ) this will allow you to remove whole glove box completly



pull up side paneling holding carpet down (held on with plugs come away easy try not to twist or you might snap plugs)



pull back carpet, blower is located on left under dash as per picture



pull out large grey plug from blower motor (for referance white box with black lid on right in picture is cabin/ pollen filter 4 screws to access)



undo brass coloured screws (all star T25 multipoint) holding blower in place and pull out hoses attached to it (remember where they go back and what position the whole unit goes back into place) screw at back requires flexi adjuster or screw driver as shape of bulk head affects ability to access with straight socket/ driver



pull out old blower may take some fettling but it will come out with a little determination and alot of swearing



reverse whole process fitting new motor



hope yous find this usefull
__________________
Life's like a road that you travel on, When there's one day here and the next day gone

Last edited by BigTazScotland; Nov 10th, 2013 at 20:05.
BigTazScotland is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:56.


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.