Error ECM-952F accelerator pedal position sensor

[VolvoRob38]

Originally Posted by andy_d

total PASS on what/where with anything diesel

on the Wheels front
oh dear,, oppsie

stripped wheel studs will be a Bit of a buuuuger to sort out and sadly Need to be as a wheel going "bounce" down the road while the car goes "Grind" and you watch the wheel + sparks,,,

https://www.halfords.com/tools/garag...ve-226636.html in 24inch + socket to fit wheel nuts - removed ,, stow in boot for "oh bugger" moments out n about along with
https://www.halfords.com/tools/hand-...00-488703.html

Or

https://www.halfords.com/tools/hand-...00-488729.html

85nM for the wheel nuts When you have sorted them
trust me £100 for a torque wrench V the cost of "sparks and wheel disappearing" is Cheap and worth the £100

if you mean the "CEM" then thats in the passenger foot well, DO disconnect the battery before playing with it ,, and Dont reach Over or Between the steering wheel to turn the key for the 1st time After reconnecting the battery,,,

Thanks Andy,

Ive got a new wrench, and think I can tap it on with a hammer to just release the nuts, then I think it would be a good idea to change them. Better at home than having to have a go at the roadside lol.

Vida says my glow replay control is in my ECM (engine control module), which is in a daft place behind the nearside wheel. I think i might change the glow plugs first as someone has suggested that that resolved their Reduced Engine Performance issue. Fingers crossed.