Where to purchase new nuts + Bolts

['88740GL]

Originally Posted by Chris740R

ahah! got you now. The bolts should all be fine, it's just surface rust. They may take a little bit of effort to move initially, but the threads will be in good condition.

Drop link (should include replacement bushings, washers and a nut to go on the end.
http://www.partsforvolvosonline.com/...oducts_id=3288

To get the right size for the other bushing, measure the diameter of your anti roll bar, it should be either 19mm or 21mm.

http://www.partsforvolvosonline.com/...oducts_id=4856

http://www.partsforvolvosonline.com/...oducts_id=4857

If for example i screw up on the measurment for examply if the anti roll bar is 21mm and i purchase a 19mm...apart from it being tight, is there any other problems it could cause?

I shall try and measure it today before i go to work...yep i work sundays haha

[fowlerman]

I usually buy my nuts and bolts from a decent engineers supply company, unless its something like cylinder head bolts. If you're not sure what you want take a sample and tell them what it's for they will see you ok.

Pete.