Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > S80 '06-'16 / V70 & XC70 '07-'16 General > S80 '06-'16 / V70 & XC70 '07-'16 Articles

Notices

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

Guide to changing the Aux belts and tensioner.

Views : 10062

Replies : 0

Users Viewing This Thread :  

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old Jun 25th, 2014, 11:21   #1
tt82
Forum Support Team
 
tt82's Avatar
 

Last Online: Sep 16th, 2024 06:34
Join Date: Jan 2009
Location: Here.... obviously!
Default

Hi all

I changed my Aux belts and tensioners the other day and here is a guide to what I did. I tried to do this using my Haynes manual but it was completely wrong for my car. This guide is for my car, a 2009 V70 D5 R-Design (D5244T4 185bhp engine)

Tools needed.

Jack
Axle stands
Wrench
19mm Socket
10mm Socket
TX25 Torx bit
TX40 Torx bit
TX60 Torx bit
Torque wrench

Parts Needed

31330379 Tensioner
31330380 Aux Belt
30757613 A/C belt
(From Rufe, these came to about £100.)

Process

First off you need to loosen the O/S/F (Drivers side front) wheel, jack up the car and support on axle stands, then remove the wheel. Once you have the wheel off, you need to remove the wheel arch liner. (Haynes suggested to remove the floor tray as well but I did it without removing it.) To remove the wheel arch liner you need to remove the 3 plastic nuts pictured with the 10mm socket -



Then you need to remove the 8 Torx screws, 3 on the rear arch and 5 on the front using the TX25 bit.





The arch liner clips onto the top of the arch and you need to push it up and inwards to remove it. Once you have the liner removed you will be able to see the A/C belt (on the right) and Aux belt and tensioner.





This picture shows the routing of the belt as seen from below.



To undo the tension on the Aux belt, place the TX60 Torx bit in the tensioner and rotate anti clockwise, following the direction arrowed. You can then slip off the aux belt.


Once you have the aux belt off, you need to remove the A/C belt. There is no tensioner for this and it is a stretch belt. I removed it by simply rotating the pulleys whilst pulling the belt towards me, gradually working it off.

Next up is removing the tensioner. The bolt inside the centre of the tensioner is a TX40, however access is very limited and as you can see from the photo, my Torx bit wouldn't fit inside the tensioner becuase of the pulley. In the end, I had to place a TX40 bit in a 8mm socket as this would be the only thing we could fit inside. I reckon L shaped Torx keys - as seen here - would be the best bet for removing the bolt.



Refitting is the reverse of removal. Make sure the wheel nuts are tightened up correctly and to the correct 140 Nm Torque setting after you finish.

Notes

Back in February of this year, I got my car stuck in mud. When removing the wheel arch liner there was a lot of dirt build up behind it. I took the opportunity to hose of the liner and inside the arch to remove this. Also doing the same with passenger side. If I do this again, I may treat the inside with a coat of waxoyl to help prevent corrosion, though with Volvo build quality I would hope it would not be necessary.
__________________
The more people I meet, the more I like my dog!


tt82 is offline   Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:03.


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.