Parts if anyone needs them!

Fridazadilak · Jul 21st, 2013, 22:47

Hi guys,

As you may know I've just done a B230FT swap into my 240 and I've got a spare B200F and B230ET gathering dust if anyone wants anything off of them?

The B200F was running fine before I replaced it, has 114k on it and has a 530 head.

The B230ET was bought off Ebay and was a duff engine (scored bores, knackered pistons and rings etc). I'm keeping the 531 head and Garrett T3, but I've got a pre-90 turbo exhaust manifold.

If someone needs something, like a bolt or sprocket etc, let me know. I know it's sometimes difficult finding a random little part.

I've also got a pretty much brand new square toothed Goodyear timing belt, only ran for a couple of minutes on the drive before I realised the new engine was a round tooth setup.

Finally, I've got some Scorpius wheels, 14x7 off my Torslanda. Two have tyres, two don't.

Dan

omc 47 · Jul 22nd, 2013, 14:55

Hi,
What condition are the wheels or can you put on pics and how much are you asking?.........they may suit my 92 240 SE.... many thanks.

Fridazadilak · Jul 23rd, 2013, 00:46

For some reason I've got 6 wheels, two without tyres, one with a 175/80, one with a 185/70, and two with 185/55s.

They could all do with a light refurb, some minor kerbing on the two without tyres.

The photos are here:
http://s76.photobucket.com/albums/j2...corpius Wheels

Derek UK · Jul 23rd, 2013, 11:27

The Photobucket album is set to "private" so not viewable. Scorpius are 14 x 6.

Fridazadilak · Jul 23rd, 2013, 11:40

My mistake, yeah they are 14x6, I'm used to writing 16x7 which are my other wheels.

The photobucket album should work now.

omc 47 · Jul 23rd, 2013, 13:53

Thanks for the info, I think I will bow out of this one due to distance and tyre sizes as I would have to change to all one size.............six wheels is some postage to Worcestershire..........Good luck

Stephen Edwin · Jul 23rd, 2013, 16:43

Has that B200F engine got a fully intact cover for the cam belt please? Is it feasible for you to remove it and send it with the fixings to me? How many groats please?

(My cambelt cover is partly broken, including a damaged lug where a fixing goes. It's not causing a problem yet but I would like to replace the cambelt cover with a good one while I am having to remove the cover. As mentioned in another thread, I'm going to have to change my cambelt becasue I need to remove the engine head.)

Fridazadilak · Jul 23rd, 2013, 23:42

I'm afraid the three covers I have are all worn through in different places. It's on my list of things to replace!

Dan

joecowan27 · Aug 5th, 2013, 13:09

im intrested in the turbo manifold, how much are you looking for for it?

Fridazadilak · Aug 5th, 2013, 19:58

I'm not looking for much for the manifold, say £20 + postage.

Jul 21st, 2013, 22:47	#1
Fridazadilak Low & Lazy Last Online: Jan 31st, 2024 18:15 Join Date: Jan 2011 Location: Torbay	Parts if anyone needs them! Hi guys, As you may know I've just done a B230FT swap into my 240 and I've got a spare B200F and B230ET gathering dust if anyone wants anything off of them? The B200F was running fine before I replaced it, has 114k on it and has a 530 head. The B230ET was bought off Ebay and was a duff engine (scored bores, knackered pistons and rings etc). I'm keeping the 531 head and Garrett T3, but I've got a pre-90 turbo exhaust manifold. If someone needs something, like a bolt or sprocket etc, let me know. I know it's sometimes difficult finding a random little part. I've also got a pretty much brand new square toothed Goodyear timing belt, only ran for a couple of minutes on the drive before I realised the new engine was a round tooth setup. Finally, I've got some Scorpius wheels, 14x7 off my Torslanda. Two have tyres, two don't. Dan __________________ Cheap, Reliable, Fast. Pick two. 1993 240 Torslanda Turbo - With added pssh tsssch! 1996 940 Sport - The new daily driver

Jul 22nd, 2013, 14:55	#2
omc 47 VOC Member Last Online: Yesterday 17:21 Join Date: Nov 2011 Location: Worcestershire	Wheels Hi, What condition are the wheels or can you put on pics and how much are you asking?.........they may suit my 92 240 SE.... many thanks.

Jul 23rd, 2013, 00:46	#3
Fridazadilak Low & Lazy Last Online: Jan 31st, 2024 18:15 Join Date: Jan 2011 Location: Torbay	For some reason I've got 6 wheels, two without tyres, one with a 175/80, one with a 185/70, and two with 185/55s. They could all do with a light refurb, some minor kerbing on the two without tyres. The photos are here: http://s76.photobucket.com/albums/j2...corpius Wheels __________________ Cheap, Reliable, Fast. Pick two. 1993 240 Torslanda Turbo - With added pssh tsssch! 1996 940 Sport - The new daily driver

Jul 23rd, 2013, 11:40	#5
Fridazadilak Low & Lazy Last Online: Jan 31st, 2024 18:15 Join Date: Jan 2011 Location: Torbay	My mistake, yeah they are 14x6, I'm used to writing 16x7 which are my other wheels. The photobucket album should work now. __________________ Cheap, Reliable, Fast. Pick two. 1993 240 Torslanda Turbo - With added pssh tsssch! 1996 940 Sport - The new daily driver

Jul 23rd, 2013, 13:53	#6
omc 47 VOC Member Last Online: Yesterday 17:21 Join Date: Nov 2011 Location: Worcestershire	Wheels Thanks for the info, I think I will bow out of this one due to distance and tyre sizes as I would have to change to all one size.............six wheels is some postage to Worcestershire..........Good luck

Jul 23rd, 2013, 11:27	#4
Derek UK VOC Member Last Online: Jun 22nd, 2024 14:01 Join Date: Jul 2006 Location: Chatham	The Photobucket album is set to "private" so not viewable. Scorpius are 14 x 6.

Jul 23rd, 2013, 16:43	#7
Stephen Edwin Premier Member Last Online: Oct 26th, 2023 20:42 Join Date: Jun 2010 Location: Thurrock	B200F Cambelt Cover Has that B200F engine got a fully intact cover for the cam belt please? Is it feasible for you to remove it and send it with the fixings to me? How many groats please? (My cambelt cover is partly broken, including a damaged lug where a fixing goes. It's not causing a problem yet but I would like to replace the cambelt cover with a good one while I am having to remove the cover. As mentioned in another thread, I'm going to have to change my cambelt becasue I need to remove the engine head.)

Jul 23rd, 2013, 23:42	#8
Fridazadilak Low & Lazy Last Online: Jan 31st, 2024 18:15 Join Date: Jan 2011 Location: Torbay	I'm afraid the three covers I have are all worn through in different places. It's on my list of things to replace! Dan __________________ Cheap, Reliable, Fast. Pick two. 1993 240 Torslanda Turbo - With added pssh tsssch! 1996 940 Sport - The new daily driver

Aug 5th, 2013, 13:09	#9
joecowan27 Junior Member Last Online: Apr 29th, 2022 20:29 Join Date: Jun 2013 Location: Nuneaton	im intrested in the turbo manifold, how much are you looking for for it?

Aug 5th, 2013, 19:58	#10
Fridazadilak Low & Lazy Last Online: Jan 31st, 2024 18:15 Join Date: Jan 2011 Location: Torbay	I'm not looking for much for the manifold, say £20 + postage. __________________ Cheap, Reliable, Fast. Pick two. 1993 240 Torslanda Turbo - With added pssh tsssch! 1996 940 Sport - The new daily driver

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)