|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
Information |
|
Towbar electricsViews : 1410 Replies : 18Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 5th, 2021, 21:54 | #1 |
Master Member
Last Online: May 19th, 2024 21:29
Join Date: Apr 2015
Location: Leicester
|
Towbar electrics
I need to add a grey 12s socket to my tow bar as I only have the black one. Iv been advised i need a split charge relay but it's something that doesnt come with a 12s socket.
Is this something that is already part of the cars wiring? I have an angle bracket which is easy enough to source and most 12s sockets come pre wired
__________________
2008 XC70 2.4D SE |
Jun 5th, 2021, 23:12 | #2 | |
Experienced Member
Last Online: Today 11:25
Join Date: Jun 2007
Location: L/H side
|
Quote:
or get a 13 pin plug to 2 x 7 pin sockets adapter lead ... https://accessories.volvocars.com/en...CC-480744/2008 No3 I would think
__________________
My comments are only based on my opinions and vast experience . |
|
Jun 6th, 2021, 06:23 | #3 | |
Master Member
Last Online: May 19th, 2024 21:29
Join Date: Apr 2015
Location: Leicester
|
Quote:
Is it to do with the electrics available on the car?
__________________
2008 XC70 2.4D SE |
|
Jun 6th, 2021, 11:24 | #4 | |
Experienced Member
Last Online: Today 11:25
Join Date: Jun 2007
Location: L/H side
|
Quote:
its just neater with one plug 👍
__________________
My comments are only based on my opinions and vast experience . |
|
Jun 6th, 2021, 12:48 | #5 |
Premier Member
Last Online: Today 11:30
Join Date: Nov 2013
Location: Newark
|
The standardization to 13 pin was to overcome the problem of the 12n and 12s plugs and sockets melting due to poor contacts and subsequent heat bulld up.
__________________
XC60 2013 D5 215 SE Lux Nav geartronic |
Jun 6th, 2021, 14:04 | #6 |
Master Member
Last Online: May 19th, 2024 21:29
Join Date: Apr 2015
Location: Leicester
|
So would changing the existing 12n socket for a 13 pin socket be an easier process?
Would I need anything else? Is there any changes to be done on vida?
__________________
2008 XC70 2.4D SE |
Jun 6th, 2021, 20:51 | #7 |
Premier Member
Last Online: Today 11:30
Join Date: Nov 2013
Location: Newark
|
You should just be able to change the wiring over with no need to use vida.
You need to make sure the socket is aligned properly to ensure easy engagement. There is a little “gizmo” that also doubles as a cover for the plug when it is not plug into the car to do this.
__________________
XC60 2013 D5 215 SE Lux Nav geartronic |
Jun 6th, 2021, 21:29 | #8 | |
Master Member
Last Online: May 19th, 2024 21:29
Join Date: Apr 2015
Location: Leicester
|
Quote:
__________________
2008 XC70 2.4D SE |
|
Jun 7th, 2021, 08:50 | #9 |
Premier Member
Last Online: Today 11:30
Join Date: Nov 2013
Location: Newark
|
There should be as the Volvo system just plugs in.
Look at Volvo accessories for your car and read the fitting instructions for the towbar fitting which will include the wiring.
__________________
XC60 2013 D5 215 SE Lux Nav geartronic |
Jun 7th, 2021, 09:35 | #10 |
Master Member
Last Online: May 19th, 2024 21:29
Join Date: Apr 2015
Location: Leicester
|
Just plugs in? If I buy a 13pin socket it's not going to have a socket on the end of it? Where would I get that from?
__________________
2008 XC70 2.4D SE |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|