|
Information |
|
V50 abs moduleViews : 750 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 14th, 2022, 06:24 | #1 |
Junior Member
Last Online: Oct 12th, 2022 17:52
Join Date: May 2022
Location: Peterborough
|
V50 abs module
06 (55) 2.0d v50 abs module
Can I simply swap this out with a known good unit or will it need a software upgrade? |
Jun 14th, 2022, 10:10 | #2 |
Member
Last Online: May 21st, 2024 09:36
Join Date: Nov 2017
Location: Brighton
|
The ABS module is coded as part of the immobiliser and it's serial number is checked before the engine is allowed to start.
If the electronics in the old unit are good, then you can swap the entire controller module over to a replacement ABS pump/valves unit. If the original fault is in the electronics, then it is possible to swap the chip that stores the serial number data to a replacement unit (or read the chip and program it into the replacement) but it is a complicated process, and might be simpler to get replaced and programmed at a Volvo dealer. |
Jun 17th, 2022, 19:02 | #3 |
Member
Last Online: May 17th, 2024 07:54
Join Date: Jun 2018
Location: Midlands
|
Maybe give these guys a try https://www.ecutesting.com/
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|