Electrics: Fitting foglights into a P1

[ww1dm1]

Are you sure? I thought it was supposed to look like the picture attached. The location, mounting and connectors seem different. Too bad there wasn't a part number on the front.

[RXS]

the big white box in the first photo is the central locking/ alarm module NOT CEM so no you do not have CEM

[ww1dm1]

Oh, that's a bit more clear then. So back to the question: if I do not have a CEM, is the relay the only thing I'll need along with lights and switch? Will the connector for the second relay be there, or will I need a different wiring harness?

[RXS]

Originally Posted by ww1dm1

Oh, that's a bit more clear then. So back to the question: if I do not have a CEM, is the relay the only thing I'll need along with lights and switch? Will the connector for the second relay be there, or will I need a different wiring harness?

as far as I understand it you need the relay witch is a double one and sits/bolted above the binnacle so that will have to come out (if you are lucky the relay mite already be there). If not The plug (should) be there possibly tied or taped up some where, there is just enough room to get a small hand in the opening to get the relay in/out.

and you will need the double fog / light switch panel and the front fog light units you will need to take off the plastic belly pan to get them in and again the wiring (should be there tied or taped up)

hope it helps