|
S40 / V40 '96-'04 General Forum for the Volvo S40 and V40 (Classic) Series from 1995-2004. |
Information |
|
v40 wiper squeakViews : 1137 Replies : 6Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jan 15th, 2007, 20:12 | #1 |
Guest
Location:
|
v40 wiper squeak
just had a good search on this subject but didnt find anything about my problem yet was of the understanding this was a common fault ,the fault being i am getting a squeak from passenger wiper after replacing wiper blade with a bosch type from hallfords no real difference gave windscreen a good clean and put some rain off or something like that on i still have the squeak after some investigation i have come to the conclusion the problem lies with the assembly between the motor and the wiper arm i have checked with volvo main dealers and i have been informed that i have to buy the complete assembly costing 80 pounds yet all i need is the plastic bit that has 3 screws securing assembly to body that the spinned part of arm threads through before attaching to main wiper arm do you think its worthwhile getting complete assembly from scrappy for half price or even a way to repair it
|
Jan 15th, 2007, 20:23 | #2 |
VOC Member
Last Online: Aug 12th, 2015 14:44
Join Date: Dec 2001
Location: sunderland
|
wiper arm
ive seen this mentioned before on the forum, people have tried various makes of wiper blades, but to what i read, mis aligned wiper arms are a contributing factor.
paul |
Jan 15th, 2007, 20:30 | #3 |
Guest
Location:
|
wiper arm
i am sure it has nothing to do with wiper blade i am fairly sure it is the plastic bit i have mentioned as i have a lot more play with the splinned stalk going through on passenger side than drivers side and some wear on inner part of plastic yet it seems this is not a common fault so i could prob get away with part from scrappy as local scrappy has a v40 atm
|
Jan 16th, 2007, 09:23 | #4 |
Premier Member
Last Online: Jan 19th, 2024 15:24
Join Date: Oct 2006
Location: Woodbridge, Suffolk
|
I had a similar issue when I purchased my '97 V40 - I replaced the wiper linkage with one from a much younger S40 from the local scrap yard. I think you'll just have to replace the whole linkage, but it's easy to do.
Cheers Paul |
Jan 16th, 2007, 13:19 | #5 |
Idiot
Last Online: Apr 21st, 2019 17:29
Join Date: Nov 2006
Location: Derby
|
Spary oil and or grease the bearings on the linkages. Mines nice and quiet, but i took off the plastic panel, also the panel was catching the lower part of the arm as someone had not reinstalled the cover correctly after putting new windscreen in.
__________________
Vectra VXR estate convert Experience = V40 1998 2.0 CD lots of mods Busy pestering the poor sods here now |
Jan 17th, 2007, 19:51 | #6 |
Guest
Location:
|
Wiper blades.
Have had same problem for almost two years, spent a small fortune on new arms and blades with success.
My problem was wear between spindle (sticking out of body) and the plastic surround. Purchased a second hand wiper linkage and spindles for £35 last week and fitted last weekend. Problem gone. |
Jan 21st, 2007, 17:08 | #7 |
Guest
Location:
|
wiper blade
yup thnx changed likage problem gone went for new cost 70 quid the problem was the plastic spindle bit cant believe cant buy them seperate what a con
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|