Used Dastek piggy back ECU.

don kalmar union · Aug 27th, 2008, 15:51

I have an old Dastek piggy back ECU with separate module to control boost pressure.

It was on my own S70 T5 early in its life and comes with the wiring loom to splice it into the underside of the ECU box.

I have no wiring instructions.

£45.

Regards, Don.

davebslater(uk) · Aug 27th, 2008, 19:01

provisionally sold !! .

Can you tell me don if the software for the old versions is still supported ie , i can take it and get it mapped .

if the answer is yes , then ill have it .

don kalmar union · Aug 27th, 2008, 20:54

Good evening Dave,

I know nothing at all about this kit any longer....I think you will have to contact Dastek in Scotland for the answers to your questions.

The unit is coated red, about 1/2" thick and 3" x 6" aprox: serial number 00967. The other small unit 1/2" x 3" x 1" approx. with s/n 002218.

Don.

Aug 27th, 2008, 15:51	#1
don kalmar union Trader Last Online: Today 10:35 Join Date: Dec 2001 Location: Chesham, buckinghamshire	Used Dastek piggy back ECU. I have an old Dastek piggy back ECU with separate module to control boost pressure. It was on my own S70 T5 early in its life and comes with the wiring loom to splice it into the underside of the ECU box. I have no wiring instructions. £45. Regards, Don. __________________ Don.Norchi. MTE performance software , TME and Ferrita stainless exhausts, AP heavy duty clutch kits, KU single mass flywheels and LSDs. 01494 785508. email don@kalmar-union.com www.kalmar-union.com

Aug 27th, 2008, 19:01	#2
davebslater(uk) redbollock guru Last Online: Jun 30th, 2016 23:54 Join Date: Jan 1970 Location: lincoln	provisionally sold !! . Can you tell me don if the software for the old versions is still supported ie , i can take it and get it mapped . if the answer is yes , then ill have it . __________________ www.dbsmotorsport.co.uk

Aug 27th, 2008, 20:54	#3
don kalmar union Trader Last Online: Today 10:35 Join Date: Dec 2001 Location: Chesham, buckinghamshire	Good evening Dave, I know nothing at all about this kit any longer....I think you will have to contact Dastek in Scotland for the answers to your questions. The unit is coated red, about 1/2" thick and 3" x 6" aprox: serial number 00967. The other small unit 1/2" x 3" x 1" approx. with s/n 002218. Don. __________________ Don.Norchi. MTE performance software , TME and Ferrita stainless exhausts, AP heavy duty clutch kits, KU single mass flywheels and LSDs. 01494 785508. email don@kalmar-union.com www.kalmar-union.com

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)