|
Diesel Engines A forum dedicated to diesel engines fitted to Volvo cars. See the first post in this forum for a list of the diesel engines. |
Information |
|
ECM-18B0 Swirl Actuator Control - Offset FaultViews : 3561 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 15th, 2018, 19:23 | #1 |
Senior Member
Last Online: Jan 17th, 2024 15:41
Join Date: Dec 2004
Location: Luton
|
ECM-18B0 Swirl Actuator Control - Offset Fault
I wonder if anyone can help with the above fault on my 2008 XC90 D5 (185).
The fault is logged after an engine shutdown. If I clear it and drive, it's OK until shutdown. Looking at the live data, on shutdown, when the actuator goes to the end of it's travel, it reports 654% - which clearly isn't right. (Actuator seems to move normally otherwise). If I manually move the arm a tiny bit it jumps back to a sensible reading (under 100%). I've just replaced the swirl actuator with a used part, and it's exactly the same (might have been a few % different before, but certainly +600 something). I'm assuming the replacement part is also faulty, but before I take that up with the supplier, can anyone offer any suggestions? Previously the swirl flap assembly and arm etc were replaced, and they all work correctly.
__________________
2004 V70R 2008 XC90 D5. 2011 C30 2.0 Past: V70 D5, 855 T5, 940, V40 T4, S40 |
May 4th, 2022, 19:43 | #2 |
Gareth
|
Did you ever resolve this problem?
I've got exactly the same thing happing on an XC60 with a D5244T4.
__________________
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|