|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
![]() |
|
Changed Battery now dash is blank !!Views : 220 Replies : 7Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
New Member
Last Online: Today 08:30
Join Date: Mar 2021
Location: Cambridge
|
![]()
Hi all,
Looking for some advice... I had to change the battery today as old one was fully flat, installed the battery today and all good and works. However...when I took it out for a drive the dash went fully blank , Speedo , temp gauge all not working fully blank. Any ideas ? Is it due to battery change ? Richard |
![]() |
![]() |
![]() |
#2 |
Me ? Surely Not!
Last Online: Today 16:19
Join Date: Jul 2010
Location: 2007 Volvo XC90 D5 Geartronic. South of Hadrians Wall.
|
![]()
Model and year?
__________________
“Do the right thing. It will gratify some people and astonish the rest.” – Mark Twain 😊 2007 Volvo XC90 D5 SE Geartronic |
![]() |
![]() |
![]() |
#4 |
Premier Member
Last Online: Today 16:28
Join Date: Jun 2010
Location: Bury St Edmunds
|
![]()
DIM failure is not uncommon in early XC90s. You can repair, contact Lukasz (spokoluzic) at
https://volvodiagnostic.com/contact/ or replace.
__________________
Greg |
![]() |
![]() |
The Following User Says Thank You to gmonag For This Useful Post: |
![]() |
#5 |
New Member
Last Online: Today 08:30
Join Date: Mar 2021
Location: Cambridge
|
![]()
Thank you I will look into it
|
![]() |
![]() |
![]() |
#6 |
New Member
Last Online: Today 08:30
Join Date: Mar 2021
Location: Cambridge
|
![]()
Would a new dash cluster need coding or is it a straight like for like ?
Also my radio screen doesn’t work fully if I get a replacement for this would this need coding also ? |
![]() |
![]() |
![]() |
#7 | |
Premier Member
Last Online: Today 09:00
Join Date: Feb 2012
Location: Preston
|
![]() Quote:
Lucaz will repair the old cluster, think it’s dry joints on the main processor chip, so will not need coding. His service is very quick as well. Can’t advise about radio. |
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|