|
S60 & V60 '11-'18 / XC60 '09-'17 General Forum for the P3-platform 60-series models |
Information |
|
EGR Valve - clean or replaceViews : 894 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
May 7th, 2021, 17:31 | #1 |
Phillip
Last Online: Jul 30th, 2021 14:35
Join Date: Aug 2019
Location: Whitstable
|
EGR Valve - clean or replace
Hi - this is on an XC60 D3 2.0.
I'm getting periodic EGR valve errors; after the 3rd time I of resetting it (via VIDA) I bit the bullet - removed the airbox and throttle body and attempted to clean it in situ; although access was good, I found it hard to see what I was doing, and I wasn't satisfied I'd done a good enough job. Sure enough suspicions confirmed - EML has come on again and I suspect it's EGR again. I have access to an endoscope which will make seeing what I'm doing easier. My questions are: 1. If I have a 2nd attempt at cleaning it, what cleaner should I use? I tried EGR valve cleaner but it turned out to be the stuff you are supposed to spray whilst the engine is running and didn't seem very good on a cloth and rubbing (I know the engine running approach isn't very successful from reading about it). 2. Is there anyway to make the EGR valve open whilst I'm doing it, just so I can be thorough? 3. Should I just give up and buy a new EGR valve? It doesn't look too hard to fit - just a bit more disassembly around it and then it's held in place by three bolts, right? TIA Phillip |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|