|
AWD Discussion A forum dedicated to the AWD systems fitted to Volvo cars. |
Information |
|
Rear bump stop renewalViews : 1388 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 5th, 2020, 11:03 | #1 |
Premier Member
Last Online: Today 16:05
Join Date: Aug 2008
Location: Newcastle
|
Rear bump stop renewal
After a few days in the P2 section with no comments, I hope you don't object to me cross posting here an AWD car issue...
My V70 AWD is splitting the rear bump rubbers ( item 19 on the attached drawing) Anyone ever replaced these items. Vida shows the attached drawing under the spares tab, but under the replacement tab item 19 is shown as a bolt through item, which it is not. I suspect they will be a little similar to replacing a brake piston seal, in that you have to go round and round pushing it a little further down until its seated into a retaining groove. Knowledge of this fact would be appreciated. Cheers Bob |
Mar 3rd, 2021, 21:12 | #2 |
Premier Member
Last Online: Feb 11th, 2023 20:32
Join Date: May 2010
Location: Blyth, Northumberland
|
If I’ve been able to link it, have a look at this thread.
https://www.volvoforums.org.uk/index.php It’s concerning my daughter’s XC70 and the bump stops (helper springs) are mounted on the upper part of the suspension, but the principle may be the same. I haven’t yet tried to fit the new ones and the car has just been MOT’d and they weren’t mentioned at all. https://www.volvoforums.org.uk/showthread.php?t=303187 Seems to have worked this time but not sure how.
__________________
Ian. Since 2005: 1992 Volvo 940 estate 2.0L. Manual. Daily driver and workhorse. Last edited by Ian21401; Mar 3rd, 2021 at 21:24. Reason: Try linking again. |
The Following User Says Thank You to Ian21401 For This Useful Post: |
Mar 6th, 2021, 14:35 | #3 |
Premier Member
Last Online: Today 16:05
Join Date: Aug 2008
Location: Newcastle
|
Thanks Ian, a lad came back to me in the P2 section telling me they were a "push fit" and locate with a lip in a groove.
I have not got around to doing job yet - more pressing this keep cropping up. Cheers Bob |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|