16v head manifolds and gaskets.

[Suterman]

I have had a good clearout recently to make room for more junk I will inevitably collect over the next few months.

I got this head about 3 years ago from a complete b234f. I stripped it down and had it hot tanked and slightly skimmed to clean up the face. I inspected it for warpage and checked the valves and guides for wear. I lapped in all the valves by hand.

It comes with inlet manifold and fuel rail (minus the fpr but they are the same a as the 8v ones, exhaust manifold, heat shield, it also comes with a 16v alt/ps bracket still with the ps pump and alternator, also included are two cam gears (drilled make adjustable to 2 degree increments) the cams, Genuine inlet and exhaust and valve cover gaskets and inlet manifold support bracket.


Also I have an exhaust manifold flange made up to suit the 16v head with the view to making a turbo manifold (never got round to it)

I have stored the head since the work was carried out under a sheet in my nice dry shed, bar a few minor scratches on the face its as good as the day I did it.

pics


Manis


Cam bearing caps


Lifters


oh yeah!


lookin' good!




No dirt anywhere.


Flange (ooh err)








£300 collection only (west midlands)

[Suterman]

Now sold