|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
DPF Faults EverywhereViews : 3236 Replies : 19Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 2nd, 2010, 09:42 | #1 |
Junior Member
Last Online: Sep 11th, 2012 14:59
Join Date: Sep 2010
Location: Leeds
|
DPF Faults Everywhere
Hi guys,
After having my S40 for 2 months (Volvo Approved Used), on Sunday night it nicely told me an "Engine System Service" was required. I dropped it off with Volvo in Leeds, who diagnosed it as a faulty DPF Pressure sensor and that it wasn't covered by my warranty. After contacting Volvo Warranty (who are utterly useless and made me realise the warranty on my car is equally as pathetic) and the service department at Volvo Bradford, I rang Trading Standards about this. I was told that I should go back to the dealer who sold me the car (Volvo Bradford) and that they are liable for selling me a car that is not of satisfactory quality - after-all, a sensor is a completely passive device with no moving parts so any failure is a problem with manufacturing. After talking with the owner of the dealership (Bradford), and being told that I shouldn't have gone to Trading Standards (the cheek!) I faxed over a copy of the diagnostic report from Leeds Volvo and later heard back that Bradford are willing to contribute 50% of the total cost (est. £614 in total). For something which, after some Googling, seems to be a common fault, I am still pretty shocked by this! Especially considering I've only owned the car for 2 months and it's already had 2 bearings replaced. I took it to Bradford yesterday for them to diagnose it themselves (why isn't a diagnostic from another Volvo dealer enough? Surely they're all trained Volvo techs?). They put a new sensor on - came up with the fault. They put my sensor back on - came up with the fault. Updated the ECM software - claimed it didn't come up with the fault and that they were able to wipe it from memory, but it flagged it the second I got in the car on their forecourt! I was wondering if anyone else has got Volvo or their dealer to pay for this fault? As far as I've been advised they're completely liable and any mention of their liability comes back with an off-hand comment about how "you really don't need remind me of our obligations". For the techies out there, the VIDA codes read by Volvo Leeds are: ECM2454 - Pressure sensor particulate trap sensor signal too low ECM2002 - Particulate trap faulty signal ECM2452 - Pressure sensor particulate trap faulty signal |
The Following User Says Thank You to NeuralCord For This Useful Post: |
Dec 2nd, 2010, 10:00 | #2 |
Motorcyclist
Last Online: May 14th, 2015 22:34
Join Date: Jul 2010
Location: Stavanger
|
Is it a brand new car, or one you bought used?
|
Dec 2nd, 2010, 10:02 | #3 |
Junior Member
Last Online: Sep 11th, 2012 14:59
Join Date: Sep 2010
Location: Leeds
|
Faffi, it's used. Just ticked over 4 years, 56k on it.
Was just under 4 years old when I got it, and 54k. |
Dec 2nd, 2010, 12:48 | #4 |
Motorcyclist
Last Online: May 14th, 2015 22:34
Join Date: Jul 2010
Location: Stavanger
|
I do not know your local legal rights, but as to the fault codes, I expect Guru or Clan to be able to give you an explanation as to what the real problem likely is.
|
Dec 2nd, 2010, 17:07 | #5 |
Lunatic from Wakefield
Last Online: Apr 16th, 2023 06:33
Join Date: Dec 2004
Location: wakefield
|
hope this may help you.
mike
__________________
2012 volvo xc90 Executive Buccaneer Bermuda 2021 |
Dec 2nd, 2010, 17:16 | #6 |
Junior Member
Last Online: Sep 11th, 2012 14:59
Join Date: Sep 2010
Location: Leeds
|
Mike, that's a fantastic help, I really appreciate it. I got your PM, but haven't hit the magical 30 posts yet to send you a reply!
|
Dec 2nd, 2010, 18:50 | #7 |
Experienced Member
Last Online: Today 14:41
Join Date: Jun 2007
Location: L/H side
|
where did they get that price ? the sensor is under £100 ... and they do go occasionaly . but the steel pipes going to the DPF should also be changed as they can get restricted inside .
They can read out the pressure from their equipment . the vital reading is 0 pressure when engine off and ignition on have they tried this ? If it is reading some positive pressure then the sensor is faulty .. Another thing the wires can break internaly near the plug on the sensor have they looked at this ?
__________________
My comments are only based on my opinions and vast experience . |
Dec 3rd, 2010, 10:21 | #8 |
Lunatic from Wakefield
Last Online: Apr 16th, 2023 06:33
Join Date: Dec 2004
Location: wakefield
|
hi adam
recieved you e mail, do you no the engine code of your car. mike
__________________
2012 volvo xc90 Executive Buccaneer Bermuda 2021 |
Dec 3rd, 2010, 10:35 | #9 |
Junior Member
Last Online: Sep 11th, 2012 14:59
Join Date: Sep 2010
Location: Leeds
|
Clan, that price is for:
- DPF Press. sensor - £70 - BPF burn off (which can be initiated by me, surely?) - ? - ECM update - £142! For software! I don't pay that much to Microsoft for Windows, which costs millions to develop! - Pipes - £79 - Diagnostic charge (cheeky!) - £97.52 I asked about the readout from the sensor, only to be fobbed off with "it's within parameters". |
Dec 3rd, 2010, 10:37 | #10 |
Junior Member
Last Online: Sep 11th, 2012 14:59
Join Date: Sep 2010
Location: Leeds
|
Mike,
It's one of the D4204T engines. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|