Radar Blocked, ABS/ESC, City Safe, Collision Warning faults

Fitzy73 · Mar 3rd, 2022, 10:47

Morning wise ones,

As you can see, I’m have the odd issuer with my 2014 D5 XC70.

The radar blocked message has been on for the 6/7 months I’ve owned it (FSM-C1A6797), but driving from Cornwall to London last week the ABS/ESC failure message appeared and is now permanently illuminated. After a nightmare 7+ hour journey, when parking, the gearbox (auto) jolted massively when going from reverse to drive (not done that since and will get the oil changed).

Then on the way home, City Safe and Collision Warning also need servicing, Hill Decent doesn’t work either oh, and just for good measure the bonnet doesn’t open.

Lots of codes, which I hope the main one is left rear wheel sensor failed and this should solve several problems (BCM-C003707).

Other codes are:

CEM-B11D453 Low Speed Collision Mitigation by braking disabled.

CVM-U041568 Invalid data from Brake Control Module.

CVM-U300066 Control Module algorithm failures signal has too many transitions.

I’m sure that will give the garage enough to keep them busy, but just wondered if anyone has any thoughts please.

Many thanks

Mar 3rd, 2022, 10:47	#1
Fitzy73 Junior Member Last Online: Feb 20th, 2024 19:20 Join Date: Feb 2016 Location: Truro	Radar Blocked, ABS/ESC, City Safe, Collision Warning faults Morning wise ones, As you can see, I’m have the odd issuer with my 2014 D5 XC70. The radar blocked message has been on for the 6/7 months I’ve owned it (FSM-C1A6797), but driving from Cornwall to London last week the ABS/ESC failure message appeared and is now permanently illuminated. After a nightmare 7+ hour journey, when parking, the gearbox (auto) jolted massively when going from reverse to drive (not done that since and will get the oil changed). Then on the way home, City Safe and Collision Warning also need servicing, Hill Decent doesn’t work either oh, and just for good measure the bonnet doesn’t open. Lots of codes, which I hope the main one is left rear wheel sensor failed and this should solve several problems (BCM-C003707). Other codes are: CEM-B11D453 Low Speed Collision Mitigation by braking disabled. CVM-U041568 Invalid data from Brake Control Module. CVM-U300066 Control Module algorithm failures signal has too many transitions. I’m sure that will give the garage enough to keep them busy, but just wondered if anyone has any thoughts please. Many thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)