|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
Awd lower front engine mount - 98 rViews : 428 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 30th, 2020, 16:33 | #1 |
Premier Member
Last Online: May 27th, 2024 20:24
Join Date: Sep 2015
Location: London
|
Awd lower front engine mount - 98 r
Good afternoon chaps
Trying to urgently source offside lower engine mount ( pref both ) with no success so far. If anybody is able to assist by advising if somebody/ somewhere has them in stock I would be much obliged to hear !!! Not been a good few days ; it is bad enough with C19 but after 11 months finally made the time to get tools and kit together to change timing belt. Some Tick Turd has knocked out the cam timing marks and replaced with a pair one of which cannot be right !!! |
Apr 29th, 2020, 15:29 | #2 |
Premier Member
Last Online: Jun 17th, 2024 14:07
Join Date: Mar 2008
Location: Derby
|
Whenever I've done the timing belt on these or the T6 engines I have marked the teeth on the old cam belt with corresponding marks on the cam pulleys and crank (tippex). I then transfer the marks from the old belt to the new belt and use it to align the new belt on the pulleys. The timing marks are then just confirmation that all is well (along with turning the engine through a full cycle to ensure the valves/pistons don't touch and the marks line up again). I've done this several times on 2.5, T5, R, T6 and D5. Rob
__________________
1997 V70R AWD, Saffron, Manual; Lotus Carlton; Ascona 400; Mini Cooper S Works; 4.2 Supercharged Range Rover; Mercedes C63 AMG Estate; Suzuki GSF1200N; BMW R80/7; Velocette Venom; Daimler V8 250. |
Apr 30th, 2020, 18:42 | #3 |
Premier Member
Last Online: May 27th, 2024 20:24
Join Date: Sep 2015
Location: London
|
Thanks Rob
My girl was running rough anyway so rather than attempt the task and having to do it again cos the timing was out I took her to a local Indy in Wickford. They were able to find the marks and had the Volvo tool to do it from the back of the cams if they were not visible so for £130 felt I could not lose, got other bits done in the price as well |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|