|
PV, 120 (Amazon), 1800 General Forum for the Volvo PV, 120 and 1800 cars |
Information |
|
new purchaseViews : 807 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Apr 8th, 2008, 07:30 | #1 |
Member
Last Online: Aug 30th, 2016 13:46
Join Date: Jun 2007
Location: reading
|
new purchase
This arrived last week. At least one forum member knows about it already as I rang him for advice before the auction ended. Thanks Paul, turned out to be a good buy in the end.
Just got to decide what to do with it now! Rides a little higher than my current car The sensible, and probably only viable, option is to break it up and keep the parts till I need them. If I had a garage I would be seriously considering building it up! (before anyone points out the garage in the picture, that's only half a garage. I could build a smart car up in there, or a motorbike, but not much else.) I thought I was only buying a shell, but there are 4 boxes of spares inside too... result! Last edited by stumph; Apr 8th, 2008 at 07:58. |
Apr 8th, 2008, 08:23 | #2 |
Ovlovnut
|
Cracking result with all the spares then!
Keep us up to date with what you decide - I'd love to see it restored, but can understand the need for the spares it can provide. Good luck in whatever you decide to do.
__________________
2004 V70 2.4SE Auto 'The Welshmobile’ 2002 Laika Ecovip 400i ( Motorhome on an Iveco 2.8TD) http://www.gitessouthbrittany.com/ http://moncopainmonchien.jimdo.com/ |
Apr 9th, 2008, 09:19 | #3 |
Premier Member
Last Online: May 13th, 2024 11:44
Join Date: Jan 2006
Location: Falmouth
|
I like the bungee strut brace
__________________
Falmouth, Cornwall. 1970 California white 131. |
Apr 9th, 2008, 15:09 | #4 |
Member
Last Online: Apr 28th, 2012 09:27
Join Date: Dec 2004
Location: Reading/Oxford
|
Looks like a good buy, has all the bodywork been done? if so you should get it sprayed and and swop all your good bits onto it.
Ive got an embty garage in wokingham that i was going to hand back to the council, but if you need it let know, rent is £29 a month |
Apr 10th, 2008, 07:38 | #5 |
Member
Last Online: Aug 30th, 2016 13:46
Join Date: Jun 2007
Location: reading
|
Bodywork has all been done, but it was done in 2001 by a bloke, not a company, so I have no idea what it is like under the primer. I think if I was going to build it up I'd have to get the primer stripped off to make sure it was all good underneath. Second problem is that I have no spare time and no car knowledge! I'd love to have a big project and build it up, but I just don't have the time. I'd have to pay someone to do it, and that means big bucks...
I think if I did build it up I'd start from scratch rather than just transfer the bits over. A proper project! Hmmmm, which engine would I put in.... |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|