|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Part numberViews : 345 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 29th, 2022, 09:10 | #1 |
Member
Last Online: Mar 25th, 2024 19:08
Join Date: Jan 2021
Location: Bury
|
Part number
Does anyone have the correct part number for a lower engine gearbox mount bush
V70 D5 2005 185hp manual 6spd Surely most if not all cars had the same one fitted but I’m getting various ones Last edited by hoj; Sep 29th, 2022 at 09:14. |
Sep 29th, 2022, 09:25 | #2 |
trying to be helpful
Last Online: Today 13:39
Join Date: Aug 2020
Location: Dagenham
|
for part numbers you can install VIDA on a PC at home and use it as a part number catalogue after entering your VIN, it's a very useful tool to have, even without the DiCE or VCX
as for the bracket I think most people just buy a whole new one because they're not massively expensive tbh try ebay various prices depending if you want volvo branded or not personally though I might be wrong I don't really feel that genuine is really necessary in this instance |
Sep 29th, 2022, 13:11 | #3 |
Master Member
Last Online: May 2nd, 2024 10:27
Join Date: Feb 2007
Location: Rochdale
|
In respect of the D5 engine I'd be tempted to disagree - unless you are lucky, and the aftermarket manufacturers have copied exactly the original qualities of the bush material in the mount, you could find an unacceptable amount of vibration from the engine occurs. I did when I polybushed mine. After all,Volvo didn't spend millions on R & D just to give their staff something to do.So I'd be inclined to go for either genuine Volvo or one of the better aftermarket brands rather than the cheapest available on ebay.
|
Sep 29th, 2022, 14:08 | #4 |
trying to be helpful
Last Online: Today 13:39
Join Date: Aug 2020
Location: Dagenham
|
Ah I missed that, certainly if diesel at the very least avoid the polybushed ones
I was thinking more along the lines of this one which looks like it has the normal rubber with the gaps in it's cheap, and at least with this part you haven't got to do any real dismantling to get at it so it's no major loss of time or effort if it only lasts a couple of years.. that's all I meant really I did put a genuine one one mine but it cost about £60 and I did wonder at the time, was that a bit overkill Last edited by stuart bowes; Sep 29th, 2022 at 14:15. |
Sep 29th, 2022, 15:28 | #5 |
Lazy Member
Last Online: Today 10:41
Join Date: Mar 2007
Location: HORLEY
|
Standard Mount or Polyurethane
https://www.partsmonster.co.uk/volvo...ush-9444-p.asp
https://www.partsmonster.co.uk/volvo...ne-15405-p.asp Last edited by VOLVOBOY; Sep 29th, 2022 at 15:29. Reason: Wrong Material |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|