(Available Soon) Aluminum Rear Trailing Arms/Panhard Bar

[Iamtheonlyreal1]

Here are some pics of the Adjustable Aluminum Rear Trailing Arms and Panhard Bar for the Late 66-73 P1800/Amazon. These are direct replacemnt aluminum arms with no mods to your rear end or body. These will allow for the fine tuning of the rear end asssembly in Performance/Lowered Postions, as well as stock height. They will allow for the correct Pinion Angles, at any ride height, and will also keep your rear end assembly centered when the vehicles ride position has been lowered.

These also have readily available, and reasonably priced replacement bushings, which come in a wide variety of compositions. Production will start on these in about 2 weeks, so if you are interested in a set, contact me off list. I am not sure how many I am going to produce on the first run, or if the run will continue.. So if you want a set, the first run is the time to get them.

They come in a standard aluminum body, with a steel threaded bushing housing.. The steel bushing housing have a polished option also, as you can see on the Panhard bar.

The standard aluminum set with the Black Steel bushing housing will be 575 dollars plus shipping.. That is for the complete set of trailing arms and panhard bar.

The standard aluminum set with the Polished Steel bushing housing will be 650 dollars plus shipping.... This is also for the complete set of trailing arms and panhard bar.

If you are interested in a set, contact me off list, and I will add you to the contact list. These are very nice quality, and install with ease. (That is if you dont have rusty original bolts) ha ha

[Iamtheonlyreal1]

For the guys that have been emailing or wonder what the specs were, here it is.. These are Air Craft grade aluminum for added corrosion protection and weight savings. They are 1 1/4" Aluminum tubing with 1/8in wall thickness, with a High Grade Steel threaded suspension bushing cups on each end... They are rated well over 500+ rear wheel horsepower, and are made for the High Performance Cobra reproduction cars, along with other American Street and Strip cars...

[tdz840]

Originally Posted by Iamtheonlyreal1

For the guys that have been emailing or wonder what the specs were, here it is.. These are Air Craft grade aluminum for added corrosion protection and weight savings. They are 1 1/4" Aluminum tubing with 1/8in wall thickness, with a High Grade Steel threaded suspension bushing cups on each end... They are rated well over 500+ rear wheel horsepower, and are made for the High Performance Cobra reproduction cars, along with other American Street and Strip cars...

Hi whats the cost?
Russ

[alastair]

Originally Posted by tdz840

Hi whats the cost?
Russ

see the first post for prices.