What exactly prevents the wheel from falling off? - Page 3

Boatie · Aug 2nd, 2024, 12:36

I don't know, handy at Christmas for those Brazil nuts.

emtor · Aug 4th, 2024, 15:12

Quote:

Originally Posted by ShadeTek

The bearing goes in in jerks and makes a definitve sound each time.

Mine did sound like that too every time I turned the bolt,-so now the bearing is in place.

emtor · Aug 11th, 2024, 09:24

The bearing on the other side came out with no problems and the pressing tool held up just fine.
The bolts that fastens the caliper holder were not so easy.
Some smartass applied red locktite on them.
On one of them I had to weld a socket on it and use my mappgas torch to get it loose. But,-all is well if it ends well.

Aug 2nd, 2024, 12:36	#21
Boatie Master Member Last Online: Yesterday 14:29 Join Date: Oct 2013 Location: Watford	I don't know, handy at Christmas for those Brazil nuts. __________________ Boatie

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Aug 11th, 2024, 09:24	#23
emtor Member Last Online: Sep 11th, 2024 18:21 Join Date: Jan 2017 Location: Karasjok, Norway	The bearing on the other side came out with no problems and the pressing tool held up just fine. The bolts that fastens the caliper holder were not so easy. Some smartass applied red locktite on them. On one of them I had to weld a socket on it and use my mappgas torch to get it loose. But,-all is well if it ends well.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)