|
Information |
|
Dice and Vida 2014d For SaleViews : 422812 Replies : 1084Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 14th, 2023, 10:33 | #25 | |
New Member
Last Online: Apr 22nd, 2024 09:47
Join Date: Aug 2020
Location: Essex
|
Quote:
https://volvodiag.com The following threads are also extremely useful if you want to set up on a Windows 10 laptop from scratch. I successfully managed to clean a laptop with a failed VIDA install and re-installed to get it working. As the poster says, the clean-up steps are VERY important, however they also throw in the instruction to install something called "CCleaner". This is just a random PC scanning tool (and not a well known one at that) and I suspect the OP is affiliated with it in some way. I strongly suggest avoiding it. *Clean-up steps - confirmed as effective: https://www.swedespeed.com/threads/v...7#post-4173865 *'Pro' install steps - confirmed as effective: https://www.swedespeed.com/threads/v...7#post-4148666 *'Non-pro' install steps - not tested but understood to be more verbose version of the 'pro' steps: https://www.swedespeed.com/threads/v.../#post-2649849 Lastly of course you need the hardware - a DICE unit or equivalent and I don't know a huge amount about the options. I have one of the so-called 'A++ clone' units, which looks exactly like the official DICE and even has the exact same chipset inside. The problem I've experienced with it in recent times is that most of the car modules show up RED in instead of GREEN in the network tab of VIDA, which means they are not communicating. At first I thought it was the car, but exactly the same occurred in a second car. From the look of it, I think the low speed CAN bus is not connecting, whereas the high speed one is (ECM, TCM etc) - perhaps this is caused by just one pin not connecting or similar? I also tried re-installing VIDA a few times and flashing the firmware on the DICE unit, all to no avail (but this is how I've picked up experience getting it installed correctly). Having likely ruled out the car and the software, my next avenue of investigation is going to be different 'Chinese' ODB2 readers to see if they show all the modules. If anyone knows a specific type that works, please let me know!
__________________
XC90 D5 SE LUX PREMIUM 2009 (deceased - don't fit after market belts!!) XC90 D5 SE 2014 (project) Last edited by Wickedy; Feb 14th, 2023 at 11:05. |
|
The Following User Says Thank You to Wickedy For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|