|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
Anti skid temporarily disabledViews : 1480 Replies : 16Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Sep 26th, 2023, 01:45 | #1 |
New Member
Last Online: Jan 12th, 2024 21:09
Join Date: Sep 2023
Location: Carrsville, va
|
Anti skid temporarily disabled
I know there are a lot of posts that start like this but mine is a little unique.
I got an engine replaced by a garage in my 2007 XC90 3.2 AWD about 3 years ago. Within an eighth of a mile leaving in the garage, the message showed up and has never gone away. I'm also getting some tire skipping/wearing when turning tight. Because it happened immediately after replacing the engine, I have to believe that it's not a coincidence. What connections could the shop have possibly left disconnected to cause this issue? Thanks in advance. |
Sep 26th, 2023, 21:02 | #2 |
Master Member
Last Online: Yesterday 18:03
Join Date: Dec 2016
Location: Southend on sea
|
There could be many reasons for this, but unless you get the fault codes read, you are only guessing.
So suggest get codes read and let the forum know and we stand a chance of helping. John l |
Sep 27th, 2023, 22:39 | #3 |
New Member
Last Online: Jan 12th, 2024 21:09
Join Date: Sep 2023
Location: Carrsville, va
|
Thanks,
I'm currently looking for a scanning tool that will work and isn't just a scam. |
Sep 28th, 2023, 20:59 | #4 |
Master Member
Last Online: Yesterday 18:03
Join Date: Dec 2016
Location: Southend on sea
|
Not sure if a ailable where you are but I use one made by autel. I am sure there will be others
Ideal solution is vida dice which is available easily in the UK, not sure where you are. ebay.co.uk/itm/165594528227 Last edited by john langrick; Sep 28th, 2023 at 23:14. |
Oct 4th, 2023, 13:14 | #5 |
Junior Member
Last Online: Oct 4th, 2023 13:56
Join Date: Sep 2018
Location: Bucharest
|
hi,
it could be the steering wheel position sensor, any ABS sensor malfunction, dirty or disconected or the wheel aligment. |
Oct 28th, 2023, 00:32 | #6 |
New Member
Last Online: Jan 12th, 2024 21:09
Join Date: Sep 2023
Location: Carrsville, va
|
Okay, I think I've gotten somewhere
The error I get is invalid data received from steering angle sensor. U042864 Does that help? Last edited by Shotgunsean76; Oct 28th, 2023 at 00:42. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|