S40 T4 Blanking plate

[boylan]

hi im looking for a blanking plate so i can fit a dump valve to my car, anyone know where to get one cheap? im not bothered about looks as its hidden by pipes lol

[gmain1967]

Best you will get IMO is genuine Forge job. No substitute for quality. And in fairness they ain't that expensive nor indeed, much more than others.

[T4Rick]

Hi mate im from manchester where abouts are you?I agree with grant they are of quality

[boylan]

Originally Posted by gmain1967

Best you will get IMO is genuine Forge job. No substitute for quality. And in fairness they ain't that expensive nor indeed, much more than others.

i think ill go for one of those, are there any stockists or is it an online only thing?

rick81 im from astley in tyldesley mate, where abouts are you ?

[gmain1967]

You are probably just as well going direct to Forge themselves, unless you can find one secondhand which I would suggest, is unlikely...

If you can speak with John Withers, he seems to know the Volvo S40 setup as well as anyone, and can certainly help.

www.forgemotorsport.co.uk
e mail john@forgemotorsport.co.uk
Tel 01452 380999
Fax 01452 386333

Cheers

[boylan]

Originally Posted by gmain1967

You are probably just as well going direct to Forge themselves, unless you can find one secondhand which I would suggest, is unlikely...

If you can speak with John Withers, he seems to know the Volvo S40 setup as well as anyone, and can certainly help.

www.forgemotorsport.co.uk
e mail john@forgemotorsport.co.uk
Tel 01452 380999
Fax 01452 386333

Cheers

thanks for that ill give him a ring tommorow. if i made my custom pipe with 90 degree hoses and a piece of pipe how would i be able to fit the dumo valve as mine isnt on a t-piece .

[gmain1967]

You'd need a specially fabricated silicone hose, with a takeoff the correct diameter, to take the valve direct. Otherwise, speak to a friendly metal fabricator/welder/blacksmith, and get them to attach the valve to a custom t piece. That's what the Forge valve comes with if you get the full S40 kit - valve, aluminium t piece, blanking plate, and vacuum hose.

[T4Rick]

Originally Posted by boylan

thanks for that ill give him a ring tommorow. if i made my custom pipe with 90 degree hoses and a piece of pipe how would i be able to fit the dumo valve as mine isnt on a t-piece .

Im near stockport mate.