|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
Information |
|
Front parking sensor connectorViews : 362 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jan 16th, 2022, 19:35 | #1 |
Master Member
Last Online: Apr 23rd, 2024 21:14
Join Date: Apr 2015
Location: Leicester
|
Front parking sensor connector
I purchased a new front inner left parking sensor as mine had a fault on it. When I took the grill of I could see one of the cables in the plastic connector was damaged and disconnected. There was just enough left on the connector to blob abit solder on and do a temporary fix. Does anyone know where you can get those connectors from? Or, do you know how to get the current cables out of the connector?
P.s. any tips on how to get that grill with sensors in back in place without damaging the sensors on the bar direct behind? It's abit tricky
__________________
2008 XC70 2.4D SE |
Jan 18th, 2022, 21:14 | #2 |
Master Member
Last Online: Apr 23rd, 2024 21:14
Join Date: Apr 2015
Location: Leicester
|
Any ideas?
The code for the connector is pa66-gf35. Can't find much online for a replacement. This is what the connector looks like https://www.ebay.co.uk/itm/connector...-127635-2958-0
__________________
2008 XC70 2.4D SE |
Jan 19th, 2022, 08:25 | #3 |
Member
Last Online: Apr 10th, 2024 11:16
Join Date: Apr 2013
Location: Near Bristol
|
I'm not sure how similar the XC bumper removal is over the V, but I would remove the bumper for sure to do this properly. It's a few fastenings in the wheel arches each side and then some poppers in the centre and some clips in the middle underneath. It's a one person quick job to remove the fastenings, but I'd recommend a hand to pull the bumper off. It's not heavy just a little too wide to man handle it off with things still attached!
__________________
SOLD - V70 D5 Auto 185 Sport SE MY2008 SOLD - V50 1.8 Manual R Design MY2009 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|