Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > AWD Discussion

Notices

AWD Discussion A forum dedicated to the AWD systems fitted to Volvo cars.

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

Tcm 0117, 010b xc90 2003

Views : 454

Replies : 1

Users Viewing This Thread :  

Reply
 
Thread Tools Display Modes
Old Dec 6th, 2021, 18:24   #1
Newbie Tony
New Member
 

Last Online: Jan 17th, 2022 16:53
Join Date: Nov 2019
Location: Yateley
Default Tcm 0117, 010b xc90 2003

Hi everyone and thanks in advance for your help.

A couple of weeks ago, I had the "transmission service required" message appear and with my OBDII reader, I read the codes 0700 and 0705. Luckily it happened on my driveway! Symptoms were: horizontal line where gear indication normally is on the dash and when I shifted from "P" to "R" position, the light went straight to "D" missing out reverse and neutral. It sounded pretty clunky too!
After looking on line, I decided to buy a new PNP sensor from FRF. I fitted it today and over the weekend got my new copy of VIDA working reliably.
Now, I'm getting normal gear selection of P, R, N, D, but after driving it half a mile the "transmission service required" returns and it's sluggish pulling away but is driveable. Connecting VIDA today I've got the TCM codes 0117 & 010B. If I'm interpreting the codes correctly (I'm new to VIDA) it's either a connection problem, a solenoid problem or a problem with the TCM itself!? The only three connectors I've undone are the three in front of the air filter housing as I needed to to replace the PNP sensor. I'm not sure what to do next! Anybody out there experienced this before?
thanks
Newbie Tony is offline   Reply With Quote
Old Jan 2nd, 2022, 20:19   #2
Newbie Tony
New Member
 

Last Online: Jan 17th, 2022 16:53
Join Date: Nov 2019
Location: Yateley
Default

Hi everyone. Just wanted to say that I decided to leave my problem until the "new year" so I've had the battery disconnected for about two weeks. I reconnected it today and ran a diagnostic check with VIDA. The TCM codes were gone and so I took it for a drive. Everything seems back to normal. Gear selection and performance were fine, tiptronic selection was working too. Thinking back to when I changed the PNP sensor, I don't think I disconnected the battery - which I should have done according to the procedure. Could my problem have simply been caused by forgetting to disconnect the battery? It makes sense when I think about it.........
Newbie Tony is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 00:03.


Powered by vBulletin
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.