|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
V50 1.6D hesitating between 1600 - 2000 RPM + Antiskid issueViews : 1338 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Oct 10th, 2021, 10:33 | #1 |
New Member
Last Online: Dec 31st, 2021 10:25
Join Date: Sep 2021
Location: Toulouse
|
V50 1.6D hesitating between 1600 - 2000 RPM + Antiskid issue
Hello there!
I'm out of ideas to try and fix my 2006 V50 1.6D The issue is the engine is hesitating under smooth acceleration always between 1600 and 2000 RPM in any gear. If I accelerate hard, it seems fine. The issue is intermittent and fairly random. Sometimes it happens fairly regularly, sometimes the car drives fine for 30 minutes and then starts hesitating again. I am not able to consistently replicate the fault when I test drive it. Along with this, I occasionnaly get the "Antiskid repair required" message pop up on the dashboard. However, this is even more intermittent as it only seems to ever happen after at least 20 minutes of driving, but sometimes it doesn't appear at all, even on a long 3 hour drive. I would say it happens on 50% of all >20min drives. Nothing in particular seems to trigger it. I do not know if this is linked with the hesitating. I have recently repaced: DPF pressure sensor Fuel Filter EGR valve (and reset in VIDA) Battery is new The 2 front wheel sensors The entire fuel system has been flushed and cleaned The Eolys fluid had been filled and reset in VIDA The car is driveable, but I find it incredibly annoying to drive when it doesn't work like it should. After clearing the codes and going for 1 or 2 drives with the hesitation and antiskids faults occuring, I either get "No faults" or just the one fault "particulate trap - signal too high" However, after driving it like this for a month, the faults have built up to this: ECM-6720 EGR control - flow too high ECM-4477 EGR control - flow too low ECM-4460 EGR control - Jammed ECM-2A40 Particulate trap - Signal too high ECM-3100 RPM sensor - Signal missing BCM-0101 Comunication between control units Communicationnal problems with ECM CEM-6C08 Central Lock, right rear door Lock failure (attachment) The central locking failure does pop up from time to time, that's fine, it's never been a problem. But, to me, having all these faults makes no sense whatsoever. So I can only imagine it being caused by a dodgy wiring loom or connection somewhere? But I'm struggling to find anything. Sorry for the super long post, but trying to be as detailed as possible. Haven't been able to find anyone online with a similar issue. If anyone has any ideas, I would be eternally greatful. Thanks |
Tags |
1.6d, acceleration problem, antiskid, hesitating, hesitation |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|