S60r manifolds????

[tommy t4]

Does any one know if the s60r manifold is the same as the s60 2.0t? Thanks Tom

[T4Rick]

Nope ive replied in the S60 section there rare as rocking horse s*it.A ported me7 manifold will do the job

[960kg]

Originally Posted by tommy t4

Does any one know if the s60r manifold is the same as the s60 2.0t? Thanks Tom

Hi Tom,
The whole 5-cylinder range will fit it is just a case of getting the correct angled flange and cutting off the 5th cylinder and welding up. some are better gas flow than others the later ME7 ones but i don`t know about which angle flange they use

I checked the S60 part number and they don`t match!!! i think it depends which year!
So i checked the 850 T5 part number and this is the same as the one in the pics. bar the last few digits which i think signify the angled type, not sure.

I would do the full conversion with what you are about to do with tuning your motor as the curved exhaust from the turbo is the most restrictive part of the system as std. so really best to enlarge as in the pics.

Do you have one?

As i have a spare which has the same part number as the one in the pics. from a `97 V70 T5 with the 90 degree flange, it is from a V70 T5 240bhp.

I Hope this helps you?

Keith

[tommy t4]

Well thanks for that Keith, in-depth and to the point like usual, I'd live your spare, in the pics that is ready to go onto a t4 I take it as it's got 4 not 5 outlets, one you've done yourself? Now this means I can have any t3 flanged turbo? Obviously not a gt60 or somink coz of the bulkhead lol

[960kg]

The pics. i had are from others

My spare is a standard 5 cylinder item that can be converted and has the same part number as in the pics

[tommy t4]

Ok cool how much do you want for it mate? And if you could I know it will be obvious any way but Mark the pipe bein cut off please?

[FIREBOLT]

Found some pics on S40concepts where a member adapted an S60r manifold, here are some of the pics from various threads.

[tommy t4]

Nice one firebolt, looks wicked after it's been polished and sprayed, Also looks fairly easy to do aswell, can't wait to receive the manifolds from 960kg as he has a spare. Need to find a 19t or a suitable garret now.

[960kg]

Originally Posted by tommy t4

Ok cool how much do you want for it mate? And if you could I know it will be obvious any way but Mark the pipe bein cut off please?

pm sent

[mitchyboy01]

Any 2001 Volvo 5cyl turbo mani will fit. Don't use an 850 one as these are worst flowing. Send a manifold to Tim Williams from T5D5. Nice chap and he will convert your manifold for £60 + postage. Did a good job on mine.