|
S60 & V60 '18> / XC60 '17> / S90 & V90 '16> / XC90 '15> General Forum for the SPA-platform 60- and 90-series models |
Information |
|
XC 60 T5 2.0 Petrol ENgine 2012 model No startViews : 285 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 22nd, 2022, 13:15 | #1 |
New Member
Last Online: Sep 22nd, 2022 22:37
Join Date: Dec 2019
Location: HK
|
XC 60 T5 2.0 Petrol ENgine 2012 model No start
Hi, I purchased a 2012 XC60 with a known broken serpentine belt. Once I replaced the belt I found that the main crank was also damaged with the rubber busHing broken causing slippage of belt.
The previous owner ran the engine without the belt to DEMONSTRATE the engine running FINE. I have now replaced the CRANK PULLEY , BELT and the engine turns but does not start. I found no locking mechaniSm in the main pulley TO fix a TDC for the blank teeth on the pulley in relation to the sensor, so I am not sure if there is any TDC setup or not. The pulley basically freewheels when loosened. The Error code thrown up says OAO F68 'Engine failed to start. Algorithm based failures.'. COuld this be to do with TDC sensor? In addition I have ben unable to find any diagram for the serpentine belt . The full set up has 7 pulleys. A. Main engine crank, Adjustable idler, Power steering, water pump, Ac compressor, alternator, idling pulley between power steering and compressor. Any help is much appreciated |
Sep 23rd, 2022, 17:57 | #2 |
Premier Member
Last Online: Today 10:49
Join Date: Feb 2016
Location: Yorkshire
|
You're in the wrong forum for your car model/year. You're more likely to get a response here:
https://www.volvoforums.org.uk/forumdisplay.php?f=187
__________________
MY17 XC90 D5 Powerpulse Momentum: SENSUS, Osmium Grey, Blond, Walnut, Xenium, BLIS + CTA & RCM, Winter Plus, Fuel-fired Heater, Heated Rear Seats, Power Extensions, Tinted Windows Coming soon: XC60 Ultimate Recharge MY24 or 25 or... |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|