|
Information |
|
Seat switch surroundViews : 2010 Replies : 10Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Jul 14th, 2016, 18:08 | #1 |
Premier Member
Last Online: Today 11:15
Join Date: Jul 2007
Location: Nottingham
|
Seat switch surround
Hello,
Looking for the driver's side seat massage/fan switch surround from a 2011 Exec. The part number on the inside is 39865795, but when I try and google the part number it doesn't seem to exist. Photo attached - hopefully. The surround is arrowed. |
Jul 15th, 2016, 15:04 | #3 |
Premier Member
Last Online: Today 11:15
Join Date: Jul 2007
Location: Nottingham
|
FRF responded and say I would have to buy the whole side panel at a cost of £74, rather than the small section I need.
|
Jul 15th, 2016, 18:20 | #4 |
Experienced Member
Last Online: Today 16:48
Join Date: Jun 2007
Location: L/H side
|
these panels are about £20 but as you have the extra buttons etc much fewer are made so more expensive .. the extra panels are glued in so the part is as one ..
__________________
My comments are only based on my opinions and vast experience . |
Jul 15th, 2016, 18:56 | #5 |
Premier Member
Last Online: Today 11:15
Join Date: Jul 2007
Location: Nottingham
|
It certainly isn't glued in as one piece on my car.
I require a replacement because the plastic clips holding it in place have broken. I suppose I could glue it in place instead, couldn't I !!!!! |
Jul 17th, 2016, 00:30 | #6 |
Volvo Driver
Last Online: Today 16:20
Join Date: Mar 2016
Location: Basingstoke
|
I've got the same spec, same year ('61 reg) car which is why I responded.
I'll have a look at mine tomorrow to see if it's glued or clipped (or both) - just out of interest. I understand why you would want to fit the correct part but, TBH, gluing it in there would prob be my solution too - I certainly wouldn't want to pay £74 (as against £20) just because there are fewer of that model - stuff that!! I assume you have tried speaking with breakers etc? I'll let you know how I get on. Cheers Dave |
The Following User Says Thank You to Harley Dave For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|