London: - Dyno morning at Power Dynamics, 15th.Dec. - Page 13

Engineer · Dec 15th, 2007, 18:59

I don’t get up this early for work

real nice to chat to nearly everybody and thanks Don and Ashok for keeping us guys re-fuelled not forgetting PE for hosting the meet.

Have a great Christmas and a Healthy New Year guys

Cheers

mole · Dec 15th, 2007, 19:07

It was a very nice day, I enjoyed meeting old faces and some new ones too (the scrap man and his old mate)

Thank Don and Ashook for feeding me again, I will try and get to some CB meets soon.

A great day, thanks to those that organised it and all that attended.

Nunchukhamster · Dec 15th, 2007, 19:19

Once again, another great meet. God to see you lot again, and to meet a few new faces.

And yes, I still have a huge smile on my face from the dyno-run

I'll scan the graph and post it up later.

morsing · Dec 15th, 2007, 19:35

Quote:

Originally Posted by STE-MAL

Henrik, what did Iain decide with you Chevy? Was It better in 2nd or 3rd?

198HP in 2nd and 195HP in 3rd Wheel speed on the rollers lose more power than you gain by the 1:1 gear ratio in third.

BHP is about 235-240BHP based on the numbers I have for that transmission

infinity1 · Dec 15th, 2007, 20:16

great morning and nice to put faces to names!! there was some very nice pieces of kit there,really fired my enthusiaum up,to get mine running right!!
hope to see you all again soon

Nuisance · Dec 15th, 2007, 20:47

Well I was happy.........

225,000 mile ex-plod heap of cr**

Boosting to 1.6 bar

Pulling just about 320 BHP...

But wait for it..... A whopping 360 lb/ft or 490Nm of torque.... Enough to pull a house down!!!

The car had to be tied down twice!!

And the highest mileage car there... pulling the most torque!

kez · Dec 15th, 2007, 21:09

well what a day.

a big thanks must go to don for sorting it out. asock for the snap. mole lol

also the guys at pd , they were great.

nice to meet new faces aswell, oh, and the noise, simply awsome.

the list goes on and on, thanks guys.

kez

Jod T5 · Dec 15th, 2007, 21:23

Quote:

Originally Posted by Nuisance

Well I was happy.........

225,000 mile ex-plod heap of cr**

Boosting to 1.6 bar

Pulling just about 320 BHP...

But wait for it..... A whopping 360 lb/ft or 490Nm of torque.... Enough to pull a house down!!!

The car had to be tied down twice!!

And the highest mileage car there... pulling the most torque!

jules i was somewhat worried when that ian went in the back room for the additional restraints...having seen your beast pull its way out of the rollers was a first for me.....a true monster it was great to meet you and the guys......
all the best
jod

Jod T5 · Dec 15th, 2007, 21:26

Quote:

Originally Posted by kez

well what a day.

a big thanks must go to don for sorting it out. asock for the snap. mole lol

also the guys at pd , they were great.

nice to meet new faces aswell, oh, and the noise, simply awsome.

the list goes on and on, thanks guys.

kez

nice to meet up kez mate.....
noise .......loud....
cheers
jod

pyaap · Dec 15th, 2007, 21:33

First of all, many thanks to Don and the guys at PD for organising the meet and arranging for the bacon rolls etc. It really was a great meet and glad the cakes went down well!! Sorry I got there a little bit late but it was really nice meeting lots of new faces; hope that will be a continuing trend for next year!

I too very much enjoyed myself and the sound of all the cars was simply glorious; hopefully we'll finally be able to get a reading for my car at PD at the next meet!

Had a good chuckle when I got home; "read" the ECU and it had two fault codes stored:
ECM-78 Engine Speed (RPM) sensor. Signal too high (faulty signal). Intermittent Fault
DTC 1-1-2 Vehicle speed signal illegal

Can't imagine why either of those would be stored in there given "I-ball" only revved it to 8800rpm!!! LOL!!!

I would also like to take the opportunity to wish all forum members a very Merry Christmas and Joyous New Year!!!

Dec 15th, 2007, 18:59	#121
Engineer Rubbing son is racing.... Last Online: Jan 18th, 2017 14:26 Join Date: Nov 2004 Location: London	I don’t get up this early for work real nice to chat to nearly everybody and thanks Don and Ashok for keeping us guys re-fuelled not forgetting PE for hosting the meet. Have a great Christmas and a Healthy New Year guys Cheers __________________ Engineer

Dec 15th, 2007, 19:19	#123
Nunchukhamster Gone. Last Online: Aug 4th, 2009 09:14 Join Date: Jul 2007 Location: Zarg	Once again, another great meet. God to see you lot again, and to meet a few new faces. And yes, I still have a huge smile on my face from the dyno-run I'll scan the graph and post it up later. __________________ Bored of the idiots, the "victims" and the spammers who have taken over this forum.

Dec 15th, 2007, 20:47	#126
Nuisance VOC Member Last Online: Jan 20th, 2019 23:05 Join Date: Mar 2007 Location: Local	Well I was happy......... 225,000 mile ex-plod heap of cr Boosting to 1.6 bar Pulling just about 320 BHP... But wait for it..... A whopping 360 lb/ft or 490Nm of torque.... Enough to pull a house down!!! The car had to be tied down twice!! And the highest mileage car there... pulling the most torque! __________________ To summarize: It is a well-known fact that those people who most want to rule people are, ipso facto, those least suited to do it. To summarize the summary: Anyone who is capable of getting themselves made President should on no account be allowed to do the job. To summarize the summary of the summary:** People are a problem.

Dec 15th, 2007, 21:33	#130
pyaap Non-T4 T4s RULE!!!! Last Online: Mar 29th, 2017 11:24 Join Date: Nov 2002 Location: Bristol / Bath	First of all, many thanks to Don and the guys at PD for organising the meet and arranging for the bacon rolls etc. It really was a great meet and glad the cakes went down well!! Sorry I got there a little bit late but it was really nice meeting lots of new faces; hope that will be a continuing trend for next year! I too very much enjoyed myself and the sound of all the cars was simply glorious; hopefully we'll finally be able to get a reading for my car at PD at the next meet! Had a good chuckle when I got home; "read" the ECU and it had two fault codes stored: ECM-78 Engine Speed (RPM) sensor. Signal too high (faulty signal). Intermittent Fault DTC 1-1-2 Vehicle speed signal illegal Can't imagine why either of those would be stored in there given "I-ball" only revved it to 8800rpm!!! LOL!!! I would also like to take the opportunity to wish all forum members a very Merry Christmas and Joyous New Year!!! __________________ "An Engine Which Runs Lean Lives on Borrowed Time" http://www.volvoforums.org.uk/showthread.php?t=13998 Last edited by pyaap; Dec 15th, 2007 at 22:30.

Dec 15th, 2007, 19:07	#122
mole Member Last Online: Feb 3rd, 2017 08:15 Join Date: Nov 2007 Location: Leicester	It was a very nice day, I enjoyed meeting old faces and some new ones too (the scrap man and his old mate) Thank Don and Ashook for feeding me again, I will try and get to some CB meets soon. A great day, thanks to those that organised it and all that attended.

Dec 15th, 2007, 20:16	#125
infinity1 Junior Member Last Online: Mar 21st, 2018 21:52 Join Date: Dec 2004 Location: frimley	great morning and nice to put faces to names!! there was some very nice pieces of kit there,really fired my enthusiaum up,to get mine running right!! hope to see you all again soon

Dec 15th, 2007, 21:09	#127
kez New Member Last Online: Dec 2nd, 2008 20:24 Join Date: Nov 2007 Location: walsall	well what a day. a big thanks must go to don for sorting it out. asock for the snap. mole lol also the guys at pd , they were great. nice to meet new faces aswell, oh, and the noise, simply awsome. the list goes on and on, thanks guys. kez

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)