|
PV, 120 (Amazon), 1800 General Forum for the Volvo PV, 120 and 1800 cars |
![]() |
|
Volvo P1800 Rock/stone guards informationViews : 779 Replies : 7Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Master Member
Last Online: May 28th, 2024 18:49
Join Date: May 2010
Location: wetherby
|
![]()
Were the rear stone/rock guards available as an optional extra in 1966 ?
I know it was a bizarre question but weighing up if its worth putting them on ? and could tell me the original UK purchase price in 1966 for a P1800S that would be great. Thanks
__________________
Clive "Lets turn up the juice and see what shakes loose" |
![]() |
![]() |
![]() |
#2 |
Senior Member
Last Online: Yesterday 21:58
Join Date: Jan 2010
Location: congleton
|
![]()
Clive,
Not sure about Jensen models but standard fitting on your year. I don't know if they serve any purpose. I put new ones on mine but stuck them on with double sided tape to save drilling the wing edge. This area is obviously prone to rust . I used plastic rivits heads to fill the holes and cut them back, superglued them in. They look ok. Hopefully they should stay on. Time will tell. Dave |
![]() |
![]() |
![]() |
#3 |
Master Member
Last Online: May 28th, 2024 18:49
Join Date: May 2010
Location: wetherby
|
![]()
Dave that sounds the way to go. Can you remember which type of tape you used.....badge tape.?
__________________
Clive "Lets turn up the juice and see what shakes loose" Last edited by CLIVERALLY; Feb 20th, 2016 at 09:47. |
![]() |
![]() |
![]() |
#4 |
Senior Member
Last Online: Yesterday 21:58
Join Date: Jan 2010
Location: congleton
|
![]()
Clive,
I used tape similar to the type for sticking number plates on. I don't know what make, it's dark green and on a roll. About 1/2" wide.. Another advantage , fit near the edge and it holds the guard tight against the body and prevents ingress of water.. Try it, nothing lost. Dave |
![]() |
![]() |
The Following User Says Thank You to volvonic272 For This Useful Post: |
![]() |
#5 |
Master Member
Last Online: May 28th, 2024 18:49
Join Date: May 2010
Location: wetherby
|
![]()
Spot on Dave will give it a shot....thanks
__________________
Clive "Lets turn up the juice and see what shakes loose" |
![]() |
![]() |
![]() |
#6 |
Master Member
Last Online: Yesterday 08:24
Join Date: Aug 2009
Location: Dublin
|
![]()
If i remember correctly the purchase price new was 2950 Dollars. The monies were transferred to Volvo AB in US dollars regardless of country via your bank and the car was then built according to your specifications.
|
![]() |
![]() |
![]() |
#7 | |
Member
Last Online: May 22nd, 2024 20:57
Join Date: Nov 2012
Location: Shotley Bridge
|
![]() Quote:
Don't know about 1966 but mine was purchased on 2 November 1967 from Olaf Olsen, Huddersfield by W & E Crowther (Woollen Manufacturers), Slaithwaite, Huddersfield. The company accounts (luckily found in Leeds University) state the total price was £1684.16 and 10d. Assume this will include all taxes! Mr Crowther must have liked the car as he didn't part with it until the mill closed in 1976 when I think he was into his 70's Cheers Andrew |
|
![]() |
![]() |
![]() |
#8 |
Master Member
Last Online: May 28th, 2024 18:49
Join Date: May 2010
Location: wetherby
|
![]()
Brilliant lads thanks
__________________
Clive "Lets turn up the juice and see what shakes loose" |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|